kandiman71874
-
Posts
3449 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by kandiman71874
-
-
3-4 weeks? I would love that. Ordered May 10th. Was just told they ship out tomorrow finally...
-
I've been running 2 sa v1 15's on almost triple (clamped) the rms rating for over 5 years now and they are still running strong. They get a tiny bit smelly if its full volume on a slightly slipped song and thats it. Never have been reconed or touched at all.
Point being if you are tuned right and your box is correct, these subs will perform flawlessly for a long time.
-
That amp looks really familiar.
Considering the connections you have, i knew you were the perfect person for this amp since it needs a little help.
-
Should be out. Dealer sheet says March-April 2016
-
New board. It's the scv line. Low voltage boards
Not a low voltage board so to speak, but will run on nothing but a 12 volt electrical system which is what 95% of the market is.
-
1
-
-
Buss Bars, Distro Blocks, And A Few Fuse Holders. The Copper Ones Are Not An Smd Product So Dont Inquire About Those..
-
Something changed and i may need one of the dual 6 terminals ones
Technical Question, What is the total height on these buss bar set up from the bottom of the base to the top of the plexi cover?
nvm on the tech question. It's been ordered regardless.
-
I know you guys are probably tired of seeing this set up as it goes through its process of getting wired but as of tonight that part is DONE!!!
So here's some more SMD fuse holder pics.
-
Lmao at a 3 footer.
Keep doin what yer doing man.
-
Hows the progress on the big 12 hole bars? Any plans to do an 18?
-
Ok, so here's some pics of the quad and octo progress so far.
And let me say something about Steve and his business practices as well.
When the package came in, everything looked good until it was opened up, and then we noticed that something had been dropped on the box and the quad plexi cover had been broken. Being as i have contact info for Steve, i got a hold of him and got a phone call as a reply. We chit chatted for a bit about this and that and sent off an email as a reminder of the incident. Two working days later a new cover showed up.
Now that's how you take care of a customer.
batteries will be wired up Friday night and the amp wires made but not installed yet. still got a couple weeks before the amp goes in..
-
2
-
-
Just curious, Are you cutting the threads by hand with a tap or will your CNC do that as well ?
-
Another installed pic of these awesome fuse holders.
More pics as the quad and octo are installed and wired up.
-
1
-
-
Got my adapters from Steve and finally put them to work today. Some speakers obviously fit better than others and i will tell you guys that a pair of Focal Access 2 ways fit kinda loose but as long as you center them, they work just fine.
Only other issue was that the mounting slots didnt line up with the factory inserts totally but not a real surprise with this car. Its an damn 96 Acura Rl. Everything on that car likes to be difficult lol
Enjoy the SMD products guys and thanks again Steve. I'll try to remember the time change next time so i dont text you at 5am lol
-
1
-
-
How does it look on the octo fuse block?
-
So 12.06" Deep. Thank You Jake
-
The motor is what i am concerned with and a mounting depth.
-
Been looking around and can't seem to find the technical dimensions drawing of the 12" Nightshade v3 anywhere.
Has Anyone seen one and if so can you share a link or post the pic in this thread.
This is the pic of the Zv4 12 so you know what i am looking for exactly.
Thanks guys.
-
MrSkippy, you do realize that people still roll cigarettes to dont you? Stop with your over sensitive reports unless you want to start handling shit yourself.
-
3
-
-
Assuming its shipping damage?
-
seat belt grounds are generally a terrible place to ground to due to the dirtiness and rust build up those connections can have. Checking resistance with a volt/ohm meter is all find and dandy but that ohm load would be the same if only one strand of wire was touching a ground point. Only way to fully check that the ground is good is to test it's continuity loaded.
I would rather use a self tapping screw and star washer on bare cleaned metal than go to a seat belt bolt.
-
http://sundownaudio.com/index.php/products/subwoofers/item/sd-series.html
Scroll down to enclosure recommendations...
-
Yeah i know he said that, i said it to be a smart ass. Jacob kind of knows my sense of humor...
-
This is looking like a $3k driver...
-
1
-
RIP Deaf Dave Cope. Co-Original founder of this website
in Off Topic - Random, Misc posts - the forum "Junk Drawer"
Posted
As I type this I am still trying to wrap my head around the fact that cancer has taken one of the greatest friends i have ever known.
Steve knew David better than any of us and with how I knew David, I know you are in some pain bro.
I am truly sorry for your loss Steve and everyone else that was close with David.
He will be missed by many.