[Enclosure Build for local: pair of 12's]

Thanks guys.

Fosgate: Im not sure what you mean by how im going to seal it..?

Decaf: Mostly because I went back and forth with him a couple times adjusting depth, he wanted it as shallow as possible so I saved myself a headache and just snaked it on one side rather than worry about mounting depth

And I got it structurally done today, carpeting within a day or so (just need to get to parts express)

Baffles mounted along with the port pieces attached to them..

Top on..

[Enclosure Build for local: pair of 12's]

T'anks

More most likely tonight...should be structurally done, not too much left to do.

[Enclosure Build for local: pair of 12's]

Hey guys, this enclosure will be for a local's pair of 12" JL W1's

Specs come to:

-3.95 cubes net

-30hz tuning

-60.125 sq inches of port

Getting to it..

More as it happens..

[sooo this guy at a local shop]

You shouldve gave him a demo

[Enclosure Build for single 15"]

Wow it's been a while due to waiting on suede. I got it all wrapped up though, probably will have another enclosure build (or 2) started tomorrow

Wasnt perfection with the suede...but wasnt horrible

[Enclosure Build for Rob's 18's]

Do work, Nick. lol

And it's finished but my camera completely crapped out on me, i'll try and get it to work tomorrow but i'll upload phone pics if it doesnt work

Lol, Rob...small car

[Enclosure Build for Rob's 18's]

is it doubled 3/4? im gonna go ahead and ask why you didnt just get 1.5 mdf?

..point me in the direction of this 1.5" mdf in my area and I'll be sure to get some

[Enclosure Build for Rob's 18's]

Much appreciated

[Enclosure Build for Rob's 18's]

Thanks guys And yea, I rent out a bay that Im slowly turning into a nice shop...but a long ways to go before it's what I want it to be.

More done..

Other side..

Mounting dowels..

Not the most progress but im not too rushed since he can't pick it up for a few days...should be done by thursday

[Enclosure Build for Rob's 18's]

Lol

[Enclosure Build for Rob's 18's]

Thanks

[Enclosure Build for single 15"]

Cleaned up..

More tomorrow

[Enclosure Build for Rob's 18's]

Got a bit more done today but not a ton

[Enclosure Build for Rob's 18's]

Lol, thanks. The baffle will be double-layered and the subs countersunk...may also have vertical supports, but the sides and back are rock-solid

[Enclosure Build for Rob's 18's]

Side going on..

Other side..

More tomorrow..

[Enclosure Build for Rob's 18's]

Alright, this enclosure will be for a pair of 18" RE MT's getting plenty of power

It comes to 5.6 cubes net and will have an interchangeable port wall a lot like my old enclosure to test out different port setups. It's nice and shallow to keep under the window line for SS No-Wall...hopefully you see a gain, Rob

Getting started..

Some pieces cut..

Side put together..

Back put together..

Back going on..

[Enclosure Build for single 15"]

Thanks guys. I knocked down the edges on the port pieces but I just moved to this shop and havent even seen my router bits anywhere, so knocked down the corners with sandpaper not the best but not terrible

Got the top put on today and it cleaned up a little...still a little sloppy..need to clean it up more tomorrow and then the suede can begin..

And again, the overhang will get taken care of as well.

[Enclosure Build for single 15"]

Thanks guys

This will be sueded and will have an AQ logo on it also sueded...we'll see how that works out.

[Enclosure Build for single 15"]

Thanks. And I dont know if he'll be getting this metered..but I'll be sure to ask him to let me know

[Enclosure Build for single 15"]

Painted..

Everything going on..

Other corner insert in..

The other inserts in..

More possibly tonight..

[Enclosure Build for single 15"]

Moar..

Port pieces going on the face..

Quick look at it..

Filling in screw holes..

Sanded down..

[Enclosure Build for single 15"]

Thanks, it was pretty much eyeballing lol.

More pics in a sec

[Enclosure Build for single 15"]

Alright, got the double-layered baffle made with both the mounting hole and countersink hole cut out tonight. Didn't want to put it on immediately because I wanted the glue to dry where the sliver's of mdf are glued together (the pieces held together by the two smaller clamps)

Countersink hole cutout..

Mounting hole cutout..

A quick look at them..

Glued + screwed together..

More tomorrow

[Enclosure Build for single 15"]

Port's 45 degree insert in..

Other 45 degree insert in..

Mock-up of the 2nd..

Was also doing a bunch of work for the shop today...tons of legs for workbenches being lined up and made

More tomorrow

[Enclosure Build for single 15"]

^Thanks. And yea, I've got a good handful of the 36" ones but mainly like 12-14 of the 24" ones

Not much was done today due to my schedule and I had to run a bunch of wood to the shop to stock up and also to start making a couple work benches (and an island to do carpeting on)

But I got 2 of the 45 degree inserts cut real quick while I was there briefly

Little bit of wood (OoOoh, clamps)

Tomorrow I should be headed to the shop before work to get some work done and then i'll be working after work as well (and no work tuesday, so plenty of progress then )