[3 level 4xl 15" or two level 5 18"]

yes sir that is what i would like to do

[3 level 4xl 15" or two level 5 18"]

ok well my build that got put on hold is getting started once again i have a questions for all of you

i was looking at putting two level 5 18" at first. but i would like to do 3 level 4xl 15" if i have enought room for the port.

will the level 4xl take to digtal design z1 straped or should i stick with the level 5.

[Hairtrick!!!]

dam it sucks when you are not expecting it

[mounting the viper 5901]

yeah i have a second shock sensor on the way. sucks but oh well

[mounting the viper 5901]

that the problem i will have to mount tight to the panle to make it fit. That brain is huge compared to the old one without remote start

[mounting the viper 5901]

i know in the manual it says not to mount it solid and the last alarm i installed had a remote shock sensor so it was no big deal to mount the brain solid and mount the sensor to some wiring so now the 5901 has the shock sensor in the brain how bad is it going to sensitive

it been a long time since i installed a viper alam

[quick question about fuse]

ok thats why i wanted to ask i have seen them around while looking for fuse

[quick question about fuse]

i thought so that what we call it at work but we got it worked out thanks for all the help guys

[quick question about fuse]

ok that is what i was thinking was going on thank again for the help have you used those resetable circuit breaker?

if so are they any good or do they wear out over time

[quick question about fuse]

thank for the help sq monty but i dont think we are on the same page about the wire size

here is what i found sticky Maximum Fuse Size

00 awg 400 amps <-------------this is the wire i have

0 awg 325 amps

1 awg 250 amps

2 awg 200 amps <--------------not this one

4 awg 125 amps

6 awg 80 amps

8 awg 50 amps

10 awg 30 amps

12 awg 20 amps

14 awg 15 amps

16 awg 7.5 amps

These are the recommended maximum fuse ratings for the corresponding wire size

this is were i got the 400amp fuse from but the biggest i can find is 300amp

i hope this make sense i know my spelling suck and makes it hard to explain my self

thanks for your help

jeromy

[quick question about fuse]

ok the wire is 2/0 awg wire

[quick question about fuse]

ok hold on yes the wire is 2/0

[quick question about fuse]

the wire i have is 00awg i though it was 2/0 but i might be wrong

ok just looked it up and yes it is 2/0awg wire or 00

not 2awg so would i be correct with using a 300 amp fuse since that is all i can find

[quick question about fuse]

ok i think i might have found my answer here it goes since i am running 2/0 i should have a 400 amp fuse up front then another 400amp fuse in the rear right before the battery and a 300amp fuse for each amp

since my amps are dual power and ground inputs i should have a 150 amp fuse on each input totaling 300amps right?

so this would be the lay out

alt----[200amp fuse]------battery------[400 amp fuse]------[400ampfuse]--battery---[300amp fuse]--amp

[quick question about fuse]

anyone? do you need more info? any rule of thumb?

[quick question about fuse]

300 amps on each amp so 600 + 80 for the kenwood i think

sorry at work dont have the amps here

[quick question about fuse]

ok this sounds dumb but i can take without crying

im getting ready to run my power wire to the back of my car (2+ 2- in 2/0awg) and need to know what size fuse i should run for the battery

i will have two interstate SRM-4D in the back what size fuse would be needed

here are the spec on the battery if it is needed

cca 1314 Reserve Capacity Min. @ 25A 390min

thanks for the help guy i just dont want my car up in flames

oh im running two dd z1 and a kenwood 4ch

[2/0, How much do you guys pay?]

same place i got mine from

[2/0, How much do you guys pay?]

i payed around 112$ for the 50ft of black welding cable i use in my accord and it did two runs front to rear i should have the red some time this week for the next two runs the stuff i got is real flexible

[Incredible-mind boggling- F-ing SIICK.]

wow that was diffrent mad skill

[1982 MEMPHIS COROLLA]

hell yeah

it looks like that ass end is getting low

[X8 Prototype Teaser Pics]

looks nice sign me up for a set

[WTB....2 FI 18" BTL's Dual 1 ohm]

have you talked to rusty you will be happy with the price he gives you

[Had my excessive amperage alternator tested.]

dam im glad i saw this before i spent any money it look lile i will get my alt from mechman

[lvl 4 xls or lvl 5 18s]

im getting ready to run two lvl5 18 in my honda but the lvl5 need around 8cft a piece per rusty