liftedranger08

Id go with the DC level 3

I have 2 powermaster d925 batteries in the cab of my extended cab ranger. They are nice little batteries and small pretty small to.

Well i have a 2000 Ford Ranger with a 5" lift and 33s right now. In a month or so, i will be getting 35s with 20s. Well i picked out a few rims that i liked. I just wanted to get yalls opinion. They will be 20s with 35x12.50 Nitto Mud grapplers. These are the pro comp 6001s These are the metal moto 951s These are V-tech torch rims. Which do yall think would look better on my white ranger? And if none of them look good to yall, suggest some. Im looking for like a 5 or spoke rim.

I can tell you the dimensions of the box. It was 2.3 cubic ft after port displacement but before sub displacement and bracing. The port had 29 sq inches because after the sub and bracing was put in, it would be rite at 2 cubic ft and the port was 29 inches long.

all the folds added together equals 8.5 ft long.

Looking good man. I cant wait to see some vids of this beast in action. Take pics of the build also. Im ready to put my level 4 in my new box.

6 12s in wall would be sweet, but if you want 4 12s, you could 4 12s firing up with the port firing to the side. I heard that does good on the meter as well.

I hope to put it in the truck maybe wednesday or so. I cant wait to hear how it sounds.

I got it almost finished. All i have to do is sand the puddy of some of the holes. After i put it in the truck and i like it, im gona put some carpet on so all the screws will be hid. Tell me what you think/ I cant wait to hear how its sounds. I hope it pounds hard bc my buddy said that 1 12 wont be loud.

Well i got a little more progress done to my box today. I got the ports painted and i got bracing in the box. Heres a couple of pics.

I got a little more done today. I was able to put bondo around the ports. Heres some pics. I havent got a chance to sand it yet. ITs just the first coat of bondo.

Im hoping to be able to apply some bondo around the ports today when i get out of school. I will post the progress that i make.

Both. the cutout was a tight fit for the pipe, so i put glue on the inside of the hole, then slid the pipe in and screwed it in. Then im gona bondo both sides.

Elemental design nine.1 will be pushing it. Its 1200 watts at 1 ohm. I hope it bangs hard especially with the ports bouncing off my rear door panel.

I have a dc level 4 12 currently in a 1.5 cubic ft box tuned to 33Hz. Ive been looking at some pics and decided to redo my box and have the ports outside. This box will be 2 cubic ft tuned to 35Hz with 2 4" ports that are 26" long. Heres some pics of old box Pics of the box being redone Around the pvc, im gona bondo the inside and outside and then paint the pipes black. Let me know what yall think.

i have a lvl 4 12 in a 1.5 cubic ft box and its loud. Im about to do either a 2 cubic ft box with ports on the outside, or a t-line. Its a great sub and it will get loud. 2 cubic ft swith about 30-32 sq inches of port will be loud.

Yea i got the orange 15s and they pound. The only thing with doing 4 is that i will have to get the newer models since i only have 2 of the oranger models.

Tacoma, ill be getting up with you in a few weeks about getting 2 1000s. Thanks for the replies. My buddy hit 151 dbs with 2 cerwin vega 15s and 1 crossfire 1000 so im hoping to hit around 152 or so with 4 15s and 2 1000s.

It says its under construction. I guess i can email them.

Let me know a price for the 1000s because I think I'm goin to do 4 cerwin vega vmax 15s in a wall with 2 crossfire 1000ds

Im looking at prices for some crossfire xs 15s and either 2 2000ds or 1 4000d. I wana run 2 xs 15s and 1 4000d if i can afford it.

I liked crossfire audio since ive gotten started into systems. I used to by some stuff from my local dealer then he sold out, then i got it from woofersetc.com but now all they have are like mids and highs ampas and maybe a few d class amps. My question is, do any of yall know any dealers that sell crossfire audio. I live in Sanford, Nc and i cant find any prices or dealers anywhere.

Port Calculator This is what i use for round ports.

Well, i just purchased a crossfire xp600d amp from this guy. Its in great shape just like he said and it was well packaged. As soon as i paid him, he sent shipped it out the next day. He even gave me a contact number so i could get in touch with him. He seems like a great guy and i would def buy from this member again.

If i can fit xl 18s in a 4 or 4.5 cubic ft box, i can get 2 in the ranger because i have about 11 or just a tad more cubic ft before displacement. Im going for lows, so will be putting them in a 4 cubic ft box restrict the lows?