fox_racin4

4 of them on 3000rms would work nicely i think! ill be the only one in my area ( ontatio...canada) with them im pretty sure haha

yes i called him up i think ill be going with lv 3 10s

i never even tought of using a bowl... lol maming the mold looks like to much work to me lol

how woul di go about flaring pvc for a port?

im eather going to go with the sdc.5s or the dc audio Lv 3s bothe seem like a great deal

i have an audiopipe ap30001d i can probly get away with wirieng it to like 1.5 ohm or someting around there after the rise never thought of the lvl 3s ill have a look

so... im looking for some new subs curently ive got 4 10 type rs im wanting to upgrade a bit but ive only got 3000 or so rms to work with and im stuck with 4 10s will the audioque sdc2.5 handle 750 rms? im limited to about 200 a sub and if i can get them in canada even better!

i didnt have much room so i put mine on the outside port wall with some foam pads under it seems to work ok

kfx thanks footlong there fans so i can keep the amp kool it still gets a little warm but im sure ill be fixin that soon i hope then once i got some cash i wanna do 4 HDC3s on 2 AP30001Ds should be alot better haha

alright update....with a vid got te box painted lime green ( thought it owuld look cool with the black amp on it) the amp is mounted with foam under it to take most of the vibrations away my vidio skills are lacking as you will beable to tell haha ill get a better vid i was kinda rushed theres quite a bit of flex to i think im able to do a hair trick...but havent tried yet i will be hopefully attempting one soon pics and vid! youtube makes te quality shit so cant really see the excursion much but..theres quite a bit haha

you have those 2 setups in your sig...yet you dont know what sub displacement is? lol its the air space that tha motor/basket take up inside the box

i usually try to keep it at 13 so i know i have a nice clean signal going to amp and subs so.. i guess ill keep it about roughtly 13

alright thanks i guess i can get a little more out of the system now then not much tho

thats the lowest i let it go unless im not paying attention and it goes to 12 or so then i turn it down a bit to try to keep it up at 13

if this helps... just yesterday i sold 2 older pioneer primiers in a box for 225$ lol so... can probly get about that or more

well.. i always keep the voltage at 13 volts when i got the system up but safely whats the lowest i should let the volts drop?

1st post last pic

well... got it in and was a pain in te ass to get it in got it in hooked it all up and then played it a bit.. wasnt as loud at the 2 10s so i thought hmm.... maybe the one subs to close to the port so i was pulling it out to "block: that hole off to run 3 of them and i noticed one of the "jumpers" was off so i put it back on and retryied it and holy ****! havent got much play time should have a vid later if it gets alittle nicer out its about to rain so... the old set up with just 2 was doing a 139.1 this is much much louder i might go get metered next week

support? you mean bracing? if no not yet will be soon though

well i got some extra cash o get the new box done and pretty well done i need to brace the top where subs are soon it hasnt been installed yet but i can see it flxing a bit specs.... 4 cubes at 35 hz with 4 10 inch type rs on a audiopipe AP30001D at 2 ohm so roughtly about 3000rms on the pairs i still need to get the gastets for the other 2 subs that you see without them (buddys got em) thanks to Fallen ( on ROE/rbc enclosures for the design) should have it in tomorow and hopefully some flexin vids!! all into this little car he he he

lol just 1 gauge to the back and a 2nd battery then 0 gauge to the amp it needs another battery or 2 and a bigger alt or a bracket to throw on a 2nd stock alt or a bigger one it is prety power hungry once the volume goes up

i can do 6 sealed but not ported what year cav was it in? mines a 94 what were the demensions you used? i cant go to tall casue my amps ned to get mounted onto my box for more room lol

theres enought room ive got it all planed out it will have to be 2 subs on teh front and 2 on the top to fit them all and then i need to get the voltage up to get some more power out of the amp as well then eventually more power on them!

well i was pretty board today so i put the other 2 10 type rs i had into my back seat to see how it would sound and surprising it it got alot louder! with teh 3 that were in teh trucnk it was doing a 139.1 at 35 hz im sure i could got to a 140 but i had no tie to play aorund with songs.tones so the 139.1 was on music with not much "playing around" box specs are ( the one in trunk) 2.9 at 30 hz the one in back seat is 3.4 at 30 hz yes i know its bad to mix and match but.. i had to do it! there all running off an audiopipe ap30001D at 2 ohms so about 3000 rms and i was gettin a huge voltage drop because the fans were on to cool the engine down ( was driving around for a while) let me know what ya think i cant fiuer out how to get the vid to post in here so heres the links lol

well got it metered didnt really get time to play with it at all but on juice box from young joc it did a 139 not bad for 2 10s im sure i could get a 140+ with some playing around