shake0707
-
Posts
36 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by shake0707
-
-
You are correct sir. Your intelli-q is your bass boost. The issue you have having is clipping. The muiltimeter will tell you nothing about clipping, you will need a o-scope to make sure you are not clipping. What are your intelli-q and settings on you hu? You issue from the information you provided seems to be with clipping. As others have stated, turn down the gain on your amp to solve this issue. If it's not loud enough for you then thing in purchasing another sub.
sensai
Thank you for the info. Intelli-q is down all the way and settings on hu are sub +15,bass -4, treble 0, mid 0.
-
wheres your other settings at on the amp, bassboost etc? subsonic filter?
no bass boost or subsonic on amp, but subsonic is internally set at 28hz. Low pass is all the way down. Could the setting called intelli-q be the bass boost?
-
Set at 50v. Sub cant be wired to 1 ohm since its a dual 1. So would an upgraded alt stop the clipping?
-
any other ideas?
-
maybe clipping or too much power.
I would say its clipping
how should i fix the clipping since i just set it with a multimeter?
-
Wired at .5 That may be a problem. Most amplifiers will not take that type of load. With the incorrect load on your amplifier it could also put a bit of strain on your woofer.
Amplifier is 0.5 ohm stable.
-
2500rms at 1 ohm. wired at .5 ohm
-
Ok guys I have an 18 inch Fi BTL Dual 1 running off of an orion hcca d5000. When I play it at full blast for maybe 1 minute, the dustcap gets hot and it starts to smell a bit. At full blast my voltage drops to about 11.5 volts. i just set the gain with a multimeter and it still gets hot and smells. Also, the amp does not even get warm when it happens. any ideas?
thanks in advance.
-
looks pretty loud.
yankee candle air freshners ftw
hell yeah lol
Damn bro, shits beatin hardd.Just got mine less than a week ago, runnin it off the RD 3250.
What size box and what's it tuned to?
Lemme know, thanks
its about 6.8 cubes tuned to 33hz. thanks
-
Just made a new box for the btl. Its running off an hcca d5000 at 0.5 ohms. In a dodge durango.
-
The next Ken Block?
-
Turns out it's the sub that smells and the dust cap is hot so what should I do now
-
I have the big 3 with a stock alt. Power and grounds were all fixed a few days ago.
-
But the thing is, ive had it in for like 2 months and it never did it before. Would it just start to smell now if thats the case?
-
I believe 0.7 but im not sure. How would i go about changing this?
-
Today I was on my way home to finally install my second battery and im bumpin pretty hard and for the first time, my amp starts to let off this awful smell. I also noticed it was pretty hot. The amp is an Orion HCCA D5000 and its pushing an FI BTL 18. The gain is all the way down on the amp and the sub level on the head unit is on -3 with no bass boost. So, I just went on and installed my second battery when I got home and turned it up and theres the smell again. Then, I opened the amp to see if anything was messed up inside, and everything seemed fine. Like I said today was the first time its ever done it and Im starting to get frustrated. Any help/suggestions would be much appreciated.
-
I might check it out
-
i got a D5000 amp too lol.. i ran it with only 1 4ga. in it too for a lil bit... but yea.. get another 4 ga in there... hows your electrical? got voltage drop?
Update on 1st post!
Blue is 0ga. power, and Silver is 4ga. ground. I get some pretty nasty voltage drop right now, Im still waiting on a second batt.. Idk if it happens to u but my d5000 shuts off when voltage dips too low.
-
here is my rant about what i know.
from what i understand, the fuses between the front and rear batt are to protect from shorts. for example, if there is a bare piece of metal on the ground and it cuts your run between the batts, the fuses will protect your batts from shorting out and exploding/damaging the batt,amp,equip, etc... thats the reason you have to have one before each batt. if the short happens in the middle of the wire, then both batts will be affected and both need to be protected.
as for the fuse before the amps, if the amps have fuses in them, then you dont "need" to add an extra fuse cause the amps already have that protection necessary. if the amp doesnt have any fuses, then it is recommended to protect your equip.
when you have both batts connected, your music should only be taking power from the rear batt. if you have your music on and you connect a dmm to the front batt and see that the voltage drops, then you know that it is taking from the front and the back batt isnt sufficient to keep up with the demands. thats the reason why people always say to put the biggest batt in the back (so it doesnt affect the front batt)
and as for grounding the amp to the back batt, its ok to do so. and if possible, do a run of 0/1 neg from front to back batt and connect the amp to the back batt. it will give the back batt and amp better connectivity. if you cant do the extra run, then just ground the rear batt cleanly and connect the amp to the batt. you dont want to be drilling alot of holes to the frame of your car..
if anything is wrong, please correct me for i am learning to. kthanksbye
edit: ^ lawls. i like that diagram
Dont mean to thread jack, but would I still be able to wire it like this if im using a duramax batt up front and an optima batt in the back?
-
-
Why does everyone uses that song for vid...(I love but true to be different)
Anyway, looks good
I used it because its the best song to show flex on the sub imo. Tomorrow I'll have up some vids of the car flexing on diff. songs.
-
nice durango. is that box sealed? do you want to sell the back seat belts? lol i cut mine when i had my box in and now i need them back
Thanks man. The box is ported on the back and I dont really want to sell them right now.
-
Yo whats up yall. I'm new to the forum and I figured I would throw my system up on here. I'm running on all stock electrical besides the big three and a yellow top up front. I should be upgrading that soon so be on the lookout. I have one quick vid to put up today, but I'll probably put 1 or 2 up tomorrow once my good cam charges.
Update with new vids
Interior Speaker Cut Out??
in General Audio - Can't find a category for your question? Ask here.
Posted
Same thing happened to me. It turned out my power and ignition wires going to the hu were loose, so that could be it