solosickness

does the airspace in my port count as part of my total box volume? or do i just subtract with mdf wood used too make the port? my port will be slotted and falred "rounded off" H =15 " w =10 " depth= 21" now for my depth of my port...do i measure 21" from the end of the rounded edge of the port "on the outside" or the rounded end inside the port?

still need to know where to measure my rounded port edge at... Too cr@sh ok i can prolly do that, so what do i do make a 10 cube box and then add my speaker and port size the recommend "witch would be less then 10 cb ft"? orrrr do i make my box larger so my total outcome volume is 10 cubes AFTER port and speaker added? this is were i am comfused

wow i never knew that...but wouldnt my bandwidth suffer? I really want a big box, it will sound deeper, and move more air...and too correctly power it ill just turn the gain all the way down and probly give it 2-3k

well, imma throw it on a rockford rft40001bd amp 4krms.. yea prolly a bit overpowered.... ok but i want the maximum box size for a kicker solo x 18 i was told that was 12 cube feet....if i am wrong PLEASE correct me...my goal is to have my box be its maximum size even after port and speaker displacment

well im wanting 12 cube for the box total...after port displacement and speaker displacment thanks bro on the speaker displacement. now i just need help on 2 more things befoe i can get back too work

plz???

Please anyone help me out lol

Hey everyone whats up! question 1 Been building my enclsure i calculated my minimal area is 126 sq inchs. so im figuring 150 is it better too be near the minimal area? or is it worth going big? 1 18 solo x kicker in a 15.54 cube box. but i havnt added port displacment yet or speaker displacment question 2 Im going too round off my port edges on both sides...but when i do that...at what point do i Measure my port length? from the end of the rounded edge? middle of the rounded edge? or begining? please let me know thanks... MY GOAL: maximum enclosure volume for a kicker solo x 18 i was told that is 12 cubic feet...if i am wrong PLEASE correct me...i would like the box to be at its max even after port and speaker displacment if you can only awnser one question please do thanks. =====if im asking my questions wrong and you dont understand what i am asking please let me know i will be more then happy too re explain my question>===

10 cubes for the x is golden? so 12 cubes would throw it off? or can i still match a golden ratio.

HELP ME PLZ

THANK YOU.... what do i do to come up with .288 what do i calc to get this? OK NOW what is the square inch surface of x2 tens and x18 square so 18x18 corner too corner calc the 10s as being round... pls ty what im trying to do is see whats more cone surface x2 round 10s or 1 square 18

anyone please?

ok i read the manuel for it and it says [exactly] Net displacment, inch3 (cc) 498(8161) so 498 sq inch i assume and 8161 sq cc so THE QUESTION IS how many cubic feet iS the solo x then? like .8 sq feet? 1.2? .5? HELP ME OUT THANKS IF U CAN TELL ME HOW DO I CALC IT MYSELF "FORMULA" SO I DONT GOTTA BOTHER ANYONE NEXT TIME.THANKS

nice find, not sure about what they really selling but good stuff.

me slow? best not be sayin that fool.

if u can go for it "those could be dubbed", but these are official. offers up and thats that.

IM prolly gunna throw them in "huge 4 a 6x9" 1.5 cubic ft sealed box. they are gunna be a part of the wall in my focus with my solo x for mids + highs. they are 300 max 150 true rms, but i throw 225rms on them. 2 inch voice coils no i didnt make them they are real. -cedence 6x908cvl high sound quality. pixs explain themselvs lol lemme know if u want more.

thanks :hairtrick:

only 3 things to say..... massive wattage massive excursion massive bass lol. click link below for pix. LEMME KNOW WHAT YA THINK! http://viewmorepics.myspace.com/index.cfm?...mageID=21518790 http://viewmorepics.myspace.com/index.cfm?...&i=21518791

bump

i dunno title sorta says it all, i am looking for the bestttt deal anyone can find on kenetik 1800's new or used help me out

oh ic ic i get it now if i have enuff batterys and alt power witch is near inpossible for the alt. but if so my voltage will never flucuate i never knew that so even if i did hook the caps up and had enuff power supplied EVERYTHING it would be a steady 14.4v? i pictured 14.1-14.4 im noob guys lol sorry least i admitt it

ok so bad idea i get it, but i thought caps were usful now everyone tells me they r junk lol why does adding caps casue bad voltage problems?

so the sampson does and can do near or around its stated rms? u didnt say ne thing bout it :--)

double posted edited deleted