Jump to content

kanes_disciple

18+ All Access!
  • Posts

    344
  • Joined

  • Last visited

Posts posted by kanes_disciple

  1. Depends on what kind of frequency the system operates at... but I have heard of large electrical/communication equipment causing problems... hell I've even had directed tell me that before. As far as the parking light output not working, that shouldn't effect the remote at all.

    Dumb question... but where is your antenna mounted?

    Its on the drivers side at the top of the windshield. On a good note the alarm has worked fine all day around my house!

  2. OK Heres what's going on. I purchased a code alarm from a reputable stereo shop where I live and it worked good for a while. From the get-go my parking lights never flashed and when I questioned the installer about it he said he had it hooked up correctly. After like a month my remote beeped one night at home and it indicated that it was no longer receiving a signal from the alarm brain. My remote is also a two way pager that way I know when my alarm is going off. Anyways I go outside and walk around the car until I was down by where the brain was and finally got it to disarm. That happened every once in a while. The car the alarm was first in got totaled and I had the same installer take the alarm back out. I got a different car and took the alarm to a different shop because I had heard some shit about the first shop. It was installed properly and again worked good for the past month. I want to point out that I live across the street from a AT&T hub where the service trucks get parked, but its not an office. So over the last week or so my remote would lose signal at night time and only at my house, this doesnt happen anywhere else but my home. Today I get ready to leave and neither one of my remotes is working with the alarm, so I gotta unlock the door and take off with the siren going off. I get like 4 blocks away, pull over and shut the blazer off. I then hit the arm button on my remote and of course it worked.

    Worked all day today at my friends house and when I went to businesses. This sounds crazy but I had to set my alarm 4 blocks away and drive home so it would stay set for the night and this is where I'm at now. I asked the guy that installed it in my blazer and he says its the AT&T hub. I can get in my blazer, hold the remote next to where the brain is and it still wont read the remote. So obviously this is an annoyance and I am looking for any help on this matter. Has anyone ever had a similar problem with a code alarm or any other kind of name brand alarm. Does anyone think the AT&T hub has anything to do with it since it only happens around my house. Now some nights it works just fine and others it goes off a few times during the night. Also the newer installer said the parking light output on my brain is bad so I dunno if that would effect the remote or not. Any help would be appreciated!

  3. Ok....Thanks for the replies guys.....is there any particular amp you would suggest? Ill be running 2 10's from a mustang mach 1000 system which will probably blow quick so I plan to replace them with Pioneer Chammpion Series 1000 watt's

    I got a Diamond Audio 600.1 on my two 12's and I'm pretty certain it puts out more than what its rated at. I would recommend Diamond Audio because for one my amp has never gotten hot, shut off, or went into protect mode. I like it so well that I am gonna buy another one in the next 6 months and also adding two more 12's to my blazer. I got a link to my build in my signature if you wanna see what they look like. I also have a Diamond 500.4 on my mids and highs now and it makes em scream. Just my 2 cents!

×
×
  • Create New...