[Tang Band Speakers]

Logitech uses them a lot.

[bass at 120 frames per second]

Get an excursion video and post it in the excursion thread

[How to wire up my sub and amp safety?]

gonna sound like crap with the bass boost maxed out.

[Burning a Dvd and Computer Shuts Off]

No need to take them apart to clean a heatsink, just blow it out with compressed air. If you use a large air compressor (not a can) just be a bit careful about it because 100+ PSI is a bit dangerous at point blank range to some components.

[Burning a Dvd and Computer Shuts Off]

blow out the heatsink of the laptop... also make sure the fan is actually still spinning. Small fans have a tendency to die.

[Burning a Dvd and Computer Shuts Off]

If it shuts off and doesnt restart by itself (as in you dont have to press the power button to turn it back on) then could be heat or power related. Software error usually restarts the system.

[Just another box build - A T-Line tuned to 30hz]

looks more like a slot ported box than a t-line.

[Old MA Audio Hard Kore 18's having a stretch]

Couple new vids taken with new cell phone (LG Dare).. supports a high speed video mode! Lose audio but gain double the capture FPS for some killer shots Not as good of quality as the SX100IS camera gets though

Excursion (skip to 3:00 and on):

Cab movement:

Windshield flex:

[Post your favorite excursion videos]

Got something you guys might enjoy

Skip to 3:00 and make sure you've got a spare change of underwear handy lol

[1st computer build any tips?]

Also, make sure all your motherboard grounding screws are tight. Or else you will have fuzzy speakers

They are all connected to a common ground plane. Fuzzy speakers would probably indicate an issue somewhere that over tightening the screws just covered up.

[1st computer build any tips?]

Seriously dude calm down. The OP never said anything about stream computing.. He just wants a basic computer to do some minor video editing once in a while.

Good to see someone was able to read what I wrote without needing corrective lenses ; )

On a side note, there are nV OpenCL 1.1 drivers out now if you know the places to look.

[MY NEW CUSTOM BUILT 12" SUB]

BIG UPDATE!!!

I AM ON THE HOMEPAGE OF CAR AUDIO AND ELCTRONICS MAGAZINE!!!!!!!

CAR ADUIO & ELECTRONICS MAGAZINE

Been really busy with phone calls, emails and pm's

I am hoping something good could come of this!!!

I guess they've never seen a custom jobber before?

[1st computer build any tips?]

Everything is about OpenCL what are you talking about? NV's SDK and driver for OCL run under the CUDA architecture they don't compete. OCL isn't like OGL my man, it's more than just graphics, it allows devs to pool a systems resources as a whole. It was created to run on everything and on any architecture...

Go to post 15 and tell me which of the items listed by the Op is about OpenCL/CUDA?

[1st computer build any tips?]

The integrated GPU on the motherboard will be fine for what you intend to do. Dont expect miracles though

Everything looks fine really.

[New video card]

Could get another 5770 and crossfire it with your first one. Crossfire between a 5850 and 5770 wouldnt work too well.

[1st computer build any tips?]

When I mentioned AMD being broke I was talking about how they don't have the money to invest in OpenCL which is why NV is smoking them in that department (which is for things unrelated to graphics which is what this guys computer is all about).

Nothing of what he listed above is about OpenCL or CUDA. As to "investing" in OpenCL, its 95% about development, not investment, and the development is happening on more than just AMD/ATi's end.

[Post your favorite excursion videos]

RE "XMX" http://www.realmofexcursion.com/videos/Resonant%20Engineering/xmx6.1.wmv

Early RE XXX sample.. cant find the original video on youtube anymore for some reason so here's the next best thing, a video of a noob recording the video off a TV to put on his own youtube page.... wtf.

http://www.youtube.com/watch?v=uezMZzhoZvI

Adire Parthenon motor: http://www.realmofexcursion.com/videos/Adire/parthenon.1.wmv

If the realm of excursion links dont work you'll have to go dig through the video archives to watch them..

[Im a underground computer geek......]

I just score good deals and build from there

Got the second 2.4 6-core in the mail.. and the SR-2 is on my bench right now Gonna get new ram for it and new heatsinks.

[Let's talk acoustics]

helmholtz resonance is vibration of air. A port is a helmholtz resonator

Blow across the top of a wine glass.. helmholtz resonator!

edit - I dont like how "; )" gives

[disapointment]

what direction are the subs facing in your car? I had a single 12 on less than 500w in a sealed "truck" box facing up towards the rear glass hatch (about the same angle) on top of the rear diff. It hammered really hard.

[these subs alright?]

http://www.poweracoustik.com/pa2006/product_AUDIO_amp_gothic.htm

# RMS Power 4 ohms: 1700 watts x 1 chan.

# RMS Power 2 ohms: 2500 watts x 1 chan.

# RMS Power 1 ohm: 3200 watts x 1 chan.

Probably rated at 14.4v, so anything under that is gonna be a bit less even.

[Birth, life and death of a t-line]

could have given it to a movie theater so they wouldnt have a piss-poor bottom end

[Let's talk acoustics]

air movement has latency to the movement of the driver diaphram, thats why the cancellation doesnt "seem" to be there. It is there, just not perceptible.

[Fusing multiple runs of 2/0]

should be ok..... but might want to get a pair of 200's in case they blow.

[Old MA Audio Hard Kore 18's having a stretch]

Bouncing my wiper blades a bit.. wasnt cranked.

A sine sweep.. and we notice an issue:

Excursion, and better view of the issue:

Couldnt get a good shot of the steering wheel or doors flexing.. or box bouncing, guess my camera just doesnt like picking it up, oh well.