bonang

Like I said i have fix alot of the issues I had. Alot of pics I dont have yet. I cut that line out and filled it in copmletely. In the fall I am adding a 8" shallow sub for midbass so the line is gone and I fixed along the front side of the door where the two plastic peices meet and cleaned that up. I just have to clean around the speakers soon and final check and go over then off for a new wrap. Thanks,for the commments, more to come btw but its fucking cold out still.

Hi All its been a while. I lost interest in the project due to cold weather being in Eastern Canda and all...... But I did a little and now I relaize I need a circle jig for sure. I ran into issues with the holes not being perfect so I have to resolve that and of course the body work still needs to be completed 100% so I can get them wrapped. So this is what I have so far mind you this is primer, not close to being done. I fix alot of the issues so far but no new updated pictures. Its getting warmer here so expoect some major updates soon!

Thanks! I know the circles are kinda rough. Kinda being a loose term! lol But in the end before I wraped it I sanded them with the DA and smoothed them.

Hi All, I had a system in this car since 08 and updagraded and changed little things here and there. Then after of course watching Meade's videos along with alot of other youtubers that I am suscribed to I decided to do a little over haul over time. My factory speaker pods....well I cut them up bad so I ended up making a new set and changed the angle on them to suit my height and not some 4ft GM engineer lol: After some mat and resin: Installed with alot of older Hushmatt During the summer I decided to do some A Pillar pods. Went with a 4" Dayton audio speaker. I read some reveiws and thought I will give it a shot. So I built the pods: Now since winter hit I bought some door panels and am about to start them. I will keep this updated as much as posible. Thanks for looking!

Fixed. Erase me!

cdn. Realy like it and its better then the junk we have around here. So realy I dont live in a area that is able to get nice gear so I bought this.

Thanks fellas I did end up buying since I live in Canada and shipping would have been killer. End up paing 150.

After talking with him this afternoon I got it down to 200 lol so it aint bad but going test it with the meter tomorrow to make sure the coils are alright.

Heres a pic so it wont lead you from the site.

Hi all, I was looking at a local ad here and buddy does not know what model sub it is.... q bl btl I know for sure its not a btl. http://capebreton.kijiji.ca/c-cars-vehicles-auto-parts-tires-audio-GPS-Custom-Built-FI-12-Subwoofer-400-OBO-W0QQAdIdZ208750321

I did a cooler once lol Should be interesting.

Well its done. Not pictured is the bondo process. Only the face is done since the rest is going to see carpet.