fi audio

I need some highs i just dont know what yet. My dash and piller speakers are 4x6's. The only idea i have right now is buying rockford fosgate 4x6's and getting rid of the stock ones i know by how everyone talks they dont make a 4x6 thats good lol. I up for suggestions on 4x6's or mabey even a component set of some 6.5's but i dont really want to run another amp just want to run off my hu thats why im thinking of 4x6's.. the power my head unit gives is 17rms x 4

alright thank you i will order a set

ive never heard their speakers before but ive heard people say their 4x6's are good anyone know? LINK IS BELOW Image dynamic 4x6

What ohm I's it wired to? And what sub(s)

Yea sorry my bad kind of threw me off just looked like a N

im getting ready to order my fi bl 12 recone well the old cone has writeing on it that says: bl 12 D2 FN FL........ i know what bl 12 and dual 2 ohm but what is FN FL mean cause i didnt order a flatwind coil or anything unless if it came with it... What is the difference between the 2009 and 2008 series im pretty sure is a 09 but i got it like right around 2008 and 2009?

Alright I figured it was built to order like the subs Thanks

Are they kept in stock or is there a build time? Sorry if it says right on your website I didn't see it but could of missed it.

Thanks guys for the help i have always heard good things about the customer service at dc.

i have a bl already.. if i had a btl or lvl 5 on the the 2200d it would play just fine i could always upgrade amps later down the road and i would already have a sub willing to take the power oh, I didnt know you were considering upgrading amps. I was just trying to save you money yea thanks man for the little heads up... what amp you reccomend me upgrading to how would a audioque 3500 be? i have always had no problems with the audioque amps

Where did you get 5 thousand watts from? yea im sure it could take it with good electrical but i dont really want to have to recone it all the time or more then i would have to if it was only on 2200-3000 watts

i have a bl already.. if i had a btl or lvl 5 on the the 2200d it would play just fine i could always upgrade amps later down the road and i would already have a sub willing to take the power

yea but either one of them would play just fine on that amp and i could always find another amp to give it more power and i would already have a sub to take it rather then have to upgrade again

this is a hard for me to decide a 12" lvl 5 or a full loaded 12" btl n2 both would be running on audioque 2200d

planning on ordering everything first of july just wondering what peoples done with them on around 2200 rms or so or if anyone had videos

single cab non blow threw box 2.5 cubic feet 34hz

bucket seats and box that acts as a center console... mines 2.5 cubic feet looks nice not big and bulky and pounds really hard getting ready to put a btl in there

i havent really seen any termlab numbers from a single fi btl n2 so what would you guys guess if it was running on a audioque 2200d or have saw one get im thinking about gettin one and staying with my single sub setup instead of buying another bl. going to go in a single cab non blow threw 2.5 cubic feet tuned to 34 hz

well if i was to strap 2 audioque 1200ds 1. how would i need that what cables needed or etc 2. would just one amp need a bass boost or would u have to use both 3. if my fi bl 12 is a dual 2ohm cause i have it wired to 1 audioque 1200d but want to add other 12 and strap the amps together how would i go about wireing it so they each have 1200 watts or can u do that with dual 2 ohm 4.would u need to set the gains etc on both amps or is it controlled by one THX FOR ANY HELP I WANT SOME KNOWLEDGE IVE NEVER STRAPPED A AMP TOGETHER WANT AS MUCH KNOWLEDGE AS I CAN GET BEFORE I GO DOING IT LOL Thanks

i didnt mean that lol i meant the 2 18s are for a suv

i would like to do that with fi btl 18s but thats for my next car like a tahoe or a blazer or something

alright so after i buy another fi bl and another audioque 1200d that would be 680 bucks estimate cause i added a recone for sub i have now that leaves me 300 for electrial upgrades got any ideas if that would get me 1 battery or a alt i could always save for the other one

yea its flush with the back of the cab now but not flush with the dash i will have to measure how much farther to the dash it is im guessing 6 inches or so and i think it would be 16-20inches tall i cant remember

1990 gmc 1500 good condition doesnt show its age lol.. but i know 2.5 would be to small im plannin on buildin a new one but i will have to do some calculations cause i dont want it being much higher its a good arm rest now and looks nice in the cab. i already have the one hooked up in the box now bangs real hard loudest ive heard i know its not the loudest but doesnt touch anyone at my schools 3 12s they have hooked up lol sounds clean to im curious on what 2 12s is gonna sound like lol

well right now i have a fl bl 12" with audioque 1200d at 1ohm.Im thinking of buying another fi bl and another 1200d be cheaper that way whats your guys ideas also what electrical upgrades i would like to keep it under 1000 if thats possible. also box ideas it aint a blow threw its a box built in between bucket seats it looks nice its 2.5 at 32hz