Jump to content

polochris

Members
  • Posts

    124
  • Joined

  • Last visited

Posts posted by polochris

  1. There will be vids dont worry its a small car with lots of bass. Smaller the better! :P Ive got the rear battries to mount also dynamat the boot and boot lid main priorities. Oh and ive ordered a Kinetik HC2000 for the front which am looking foward to putting in and putting it through some testing!!!

    People over here say KICKER SOLO X are the worst subs to go for and dont get loud :D :D :D

  2. Ive started a new box for my solo x's and ive made the port as it was before and putting it in the middle but i might change it to full length of the box across so the subs are split from each other as this port allow 1 inch gap either side.

    My system contains 2 x 12" Kicker solo x and a mtx thunder series 4000d run at 1 ohm, followed by my KQ9 equalizer by Kicker.

    I got quite alot done on the build yesterday box is nearly built but as for the resin is takes ages to complete as every angle needs to be done for major strength and to seal it.

    dqtn9.jpg

    2dm6uo.jpg

    dy7ghz.jpg

    8yci85.jpg

    30iz151.jpg

    290y07d.jpg

    Ive got the Port complete sprayed it black before i install it into the box so it looks dark into the box alongwith the floor which also sprayed black.

    2hro6zp.jpg

    k00efp.jpg

    Next thing is to screw and glue the bottom along with resin the bottom also, create another top piece flush to the side of the c pillars and cut it bigger than the diameter of the subs so theyll be flush mounted once in. I also making sides for the box so its flush all the way round to the boot of the car and ive got a little trick to do on the front of the box when its comes to fabrication process.

  3. Extra battries / H/O alt way to go buddy, caps arnt suficent enough for the amount of strain if your running lots of watts. People who say caps, way to go normally dont know what there talking about i can go alot deeper into it but i dont think there any need too. Kinetik i would although me and my mate have just purchased some from the US ive been using yellowtop and slowly moving to kinetiks i would like to see if they do help with voltage drops as much as they say test begins i suppose.

×
×
  • Create New...