Audio-Concepts
-
Posts
2012 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Audio-Concepts
-
-
that look good man. i still need to try to fiberglass. once i get a house maybe cuz there is no room here at my apartment lol
I live in an apartment too and I actually built my radio housing on my kitchen table, the wife was livid when she got home and there I sit resinning away, lol
-
they'll tell us when they make one
but they've made 4 LMAO!!!! I'm just curious, I know I can't afford it, especially with the cash I've just spent on my system
-
More than you can afford pal, Ascendant.
Wow, that's kinda harsh, LOL!!! I was curious on the same thing, but unsure if I want to know now. But why don't you humor us and give a rough estimate on the debut price in the oncoming 2010 year.
-
If you have a bench
Hook up the Big 3 and a 200amp alt and you should be ok.
If you have buckets w/ center console
Hook up Big 3 and run a secondary battery in the center console. run batteries underneath and no problems should come up.
If still having voltage issues.
add battery to having a bench
---------------or-----------------
add alternator to buckets setup
I wouldn't run a cap because they are more of a headache then the money they are worth.
-
If you have a bench
Hook up the Big 3 and a 200amp alt and you should be ok.
If you have buckets w/ center console
Hook up Big 3 and run a secondary battery in the center console. run batteries underneath and no problems should come up.
If still having voltage issues.
add battery to having a bench
---------------or-----------------
add alternator to buckets setup
I wouldn't run a cap because they are more of a headache then the money they are worth.
-
I'm from Highland, up in the NW Indiana portion, prolly hour and a half from you depending how fast I drive.
-
I'm Mike, been doing the whole custom fab deal for about 10 years solid. Found this site through a couple friends and have thoroughly enjoyed watching everyone's builds and seeing what's new in the world of BASS travel. LOL!!!! I hope everyone enjoys what I bring to the table and I hope I can bring more people from my region into this forum.
-
Yeah I see what you are talking about, but it's prolly because of the headliner foam underneath holds the form, when you push it down. But when it relaxes everything looks uniform and nice.
-
why remove the bottom picture, that was a customer of mine???
Thanks for the contacts as well!!!!
-
I've been looking for a reputable Shop in the Chicagoland/NW Indiana area, that will give me the opportunity to show my skills in the field. I have been doing car audio and custom interiors for over 10 years and would like a chance at becoming an asset to a shop. If there is anyone that has any knowledge of a shop or company willing to give a 26 year old audio fanatic a job that would be wonderful. I have some of my work below so you all can get a feel of what I can bring to the table.
Thank You
Mike
Hopefully these give you an idea.
-
Each sub is in 1.75 cu ft separate enclosures, not enough room for a pair of ported, with still keeping the back seat.
The subs are the JL W7 13"
-
Front beauty panel start
False Floor wrapped in black vinyl
Equipment
1/0 front to back
4/0 from secondary batteries to amps
3 250 amp circuit breakers
2 1000/1 JL audio amps
1 300/4 4ch
2 13" W7 subs
2 sets of Memphis 6.5" components
If all goes as planned there will be a set of components molded into the doors in custom pods and a custom set of kick panels for the others, as well as a one off dash kit for a 10 inch raw screen and Alpine In-dash DVD receiver. But that will come at a later time if he has the money, will keep posted on the future progress.
-
Here's a customer car that isn't quite finished yet but he's short on money so we're taking a break.
2 sheet of MDF 3/4"
Box front wrapped in headliner foam then Black ultra suede
Battery Tray
-
yeah I hear you, the only problem I see is the heater ducts inside the dash are fixed and hard plastic. I mean you could move them but you'd have to make a single center duct, and cut and glue the inner ducts. I'd move them to the top where the controls are. Then move the controls to the center console, and mols the screen into the center after you cut the bracing and make new bracing.
You could use the existing ducting and remold the vent in the center at the top. That would be the best option in my view to keep the center vent.
-
Why don't you leave the factory locations and just put the screen in the center concole, and maybe hide the mini side the dash, so is subtle and clean. That way you can still listen to the radio while fabrication is being done.
R.I.P. Image Dynamics!?!?
in General Audio - Can't find a category for your question? Ask here.
Posted
After how many years showing people amazingness and quality still lives, it comes as a depressing day, to see that such a great and reputable company as Image Dynamics has possibly shut its doors!
I went on their website yesterday and saw one page a page stating and I quote-
"Thank you for years of support. It is with much sadness that I say goodbye" Eric Stevens- Founder Image Dynamics.
If anyone out there has anymore info on this please let it,be heard, I know I'm not only one wanting info!!