Jump to content

Ludachris5150

Members
  • Posts

    348
  • Joined

  • Last visited

Posts posted by Ludachris5150

  1. 22 hours ago, oldsoundguy said:

    Well I didn't save a pic of the calculations I did. I did put the numbers back in and came up with something real close. I added 1 extra 1/2" baffle and the getting the Physical port length you enter 33 in the port length. I put in .05 for bracing and 2 common port walls. Try that. If its close to my numbers you should be close. I am sure mine isn't exact to the specs you see or even tuning unless you have a way to measure it. I don't.

    Right, thanks I'll give it a try. How much power are you giving it? Sorry, 60+ pages is a lot to read thru. 

  2. 3 hours ago, oldsoundguy said:

    I think all the info is in the first post??

    Right. But I found your Torres sheet in your thread and typed it in myself. I can't seem to get anywhere near .75 net tuned to 35hz myself... Waiting on an amp before I build my box but it would be awesome to have a box design ready. Mine will basically be like yours but rear facing 

  3. I second the "what the hell did you illuminate that box with?!"

    looks like a monster in the making

    led strips from partsexpress.

    Get the other side done?

    working on it boss :)

    That looks good man, love that pallet of subs!

    thanks

    Great looking build man. These gonna be powered by the 2 9ks??

    I sold the 9ks a while ago.

    Plan on getting a pair of 10ks soon...

    God damn! This is nasty!!! Wish I could hear something like this in person

  4. I am very excited about this line... a truly high excursion line at reasonable prices. I had a very particular vision with this line in mind -- I was not happy with simply making an evolutionary step from the SA line as our previous prototype from a few years back was. I wanted a fully new platform line to delivery truly GREAT performance. I think once the final specs are released and people see / hear these they will be a big hit.

    Another cool thing about the X series motor is that it can be pretty easily re-coned with many popular 3" coils from custom sources such as FixMySpeaker in case someone tears one up and wants to go that route smile.png Many 8-layer flats will fit the gap.

    I cannot wait to see some builds with the new Zs and Xs. Throw a box together for one of them now!!! :drink40:
  5. So I am tinkering with the SA-10/12/15 design again... there are some things that I just have to try out. This could result in an actual v.2 revision at some point but I won't say it will be in 2012 as the current models are already extremely popular / awesome woofers and I am reluctant to mess with them much -- and it would have to be REALLY good to make the change. BUT I am *always* on the lookout for a way to improve even our best stuff -- that is just how I like to do it :)

    SA-18 in 2012?

  6. So I am tinkering with the SA-10/12/15 design again... there are some things that I just have to try out. This could result in an actual v.2 revision at some point but I won't say it will be in 2012 as the current models are already extremely popular / awesome woofers and I am reluctant to mess with them much -- and it would have to be REALLY good to make the change. BUT I am *always* on the lookout for a way to improve even our best stuff -- that is just how I like to do it :)

    SA-18 in 2012?

  7. I would go with the sax 1200,much higher quality amp, smaller, and built to put out most of it's power when wired to 1ohm like most daily drivers. I believe Jacob has clamped around 1200@2ohm from the sax 1200.

    quoted from sundown

    I got the sample of my v.2 SAE-1200D in... testing is going quite well. Honestly... I need to change the part number to SAE-1500D on these *laughs*

    TEST 1:

    1 ohm nominal @ 60 Hz

    1440 Watts

    54.6 V

    26.4 A

    2.07 ohms

    ** Over rated power at 1 ohm nominal with 2x rise

    Cool, thanks. Sae-1200 v2 it will be

×
×
  • Create New...