Soapbox
-
Posts
1021 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Soapbox
-
-
try not tuning at 30hz
Even though the box is at 30 peak in the car is 54. Problem with the first box is not enough port area and uneven loading of the subs.
-
You kind of miss understood or I wasn't specific. I currently have 3 different boxes available.
1st is 1.6 cu ft with 1 4" aero tuned to 30. This box is what I got a 132.9 in AS3 and a 117 in db3. ( this box is designed for 3 sa-8's) This one is going in the pile.
2nd is 2.4 cubes kerfed port tuned to 30 designed for 3 sa 8's.
3rd is a Transmission line tuned to 30 for 2 Sa 8's. I just installed this box today and it is louder than the one I metered. I'm going to hit the meter as soon as I can make an appointment.
Running the 3rd box I should be able run 80 amps of fusing and place in AS-2
-
What class are you in and which are you going to? AGUs are mostly used because they are cheap so blowing a lot of them in testing is not a big deal. The filament sizes look the same on ANL and AGU fuses. Its just harder to find bigger AGUs like 150s and higher vs ANL which is easy to find anywhere. However you can just run more smaller fuses. I used to run a 300 amp ANL and now I run 5 50 amp AGUs for daily. When I compete, I just take out 4 AGUs and switch the 50 with a 40 amp.
I'm trying to get into AS2 using 3 sa 8's and a saz 1500. I have 3 boxes I'm working with currently.
-
MECA is the reason for this post. I think I can drop a class. However I believe I will be blowing fuses a lot. The only styles I'm considering are mini and full ANL.
-
I know from experience there are some poor quality fuses manufactured. In fact I have a few dozen laying around I'm sure. Going from this preface in your experience what brand of fuses do you use? Also being somewhat of a hoarder I would like to know where I can purchase in Bulk (at least 10 at a time but I prefer 25). Thanks for your comments in advance.
Soapbox
-
spill the beans and share some of the magic with us. Specifics on the box plz.
-
you said down to la where are you located?
-
Displacement is .1
What size T-Nut to mount Sa-12?
in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Posted
1/4 20's work fine. Despite what everyone else has posted it isn't advisable to set them using the bolt. If you dab the pronged in and then use a c-clamp to draw them tight. Using this method you'll greatly reduce the spinning effect which some times happens using the other mentioned methods.