[bolted magnet structures]

im about 90% sure he talking about the magnet shifting away from the basket... hints the bolted magnets hes looking for. i think when hes off roading the sub gets thrown around a bit and the glue holding the magnet to the basket starts to give and it shifts.. just my .02

[Have you broken the law today? ANY law.]

i can name them and only left the house once.

1. speeding 15 over droping the girl off

2. no seatbelts

3. no turn signals

4. not totally stoping and any stop signs

5. roasting tires leaving school

and i havn't even left for work yet. lmao

[lvl 6s?]

yeah i like the smds to they look badass. but the motor on the lvl 6s are sexy as hell and are beastly.

but the BIG question dose anyone know when either one is coming out??

[lvl 6s?]

i want my system to get down and sound good doing it im working on my box for a while its 16cf and tuned at around 34 braced and all that stuff so no flex fo sho.

[lvl 6s?]

If you have about 5k plus to each lvl6 I would wait. if not get the lvl 5's.

well thats not my prob lol i was wanting to run 6-12k wrms so it will be fine i have a while untill i get my truck done so you guys think they will be out by 2 months or so?

[Dual voice coil]

no... no you don't HAVE to.

But not using both coils is like getting a dually truck where one tire on each side is 2 inches shorter then the other. pointless.

or running only 2 tires on the back insted of 4

[Dual voice coil]

YES both must be wired together or you WILL mess your coils up look it up on rockfords web site how to wire your dvc subs the way you should to get the maxium output

[lvl 6s?]

dose anyone know when they will be out i know theres fifty topics on this but i would like to know this because im debating on buying 2 lvl 5s or waiting on the lvl 6s or the smds

[Car amp in room?]

the best way ive seen is using a old power supply out of a desk top computer it works awsome i got a toggle switch on mine so i can power it up with a flick of a switch just search around on google and u can find how to wire them id look but not at home now i know u have to connect to wires together to get it to send power thru the wires and power up that badboy i ran a rf 500.2 in my room for ever with one of these

[6k wrms right electrical?]

well money isnt really an issuse i can save a couple cheaks and get a 300amp and be ok? and mla i dont think i can see nothing is stock under my hood the only thing that is the same from when it had the 4.3 vortec in is the serpinten setup everything else is custom and 4 runs i was thinks about 4 but wasnt shure would it be over kill for some 0/2 or would it be better?

[6k wrms right electrical?]

well its not set in stone but a yellow top under the hood and some xs d3100 or d2700 in the back if i could would it better to get a 300amp alt i think my truck came stock with a 150 or so witch will not cut it for any of my needs.

[6k wrms right electrical?]

would just a 250 amp alt big 3 and 3 for 4 extra batts in the back be enough to support 6k rms? it would be in a 92 blazer 2 door with 2 ap30001 still undecided on subs yet but my box is 9cft i will be starting my build soon after i get my motor back in i dont think i can run dual alt setup because of space blazers never came with v8s and theres not much room after its in so i would like to know the safest way to run 3-6k on one alt or is it possible to keep from dropping below 12volts?

thanks

Zach

[A different type of SPL]

holly hell thats a beast man whats it running down a quarter

[my box design and specs]

well i only see one problem man did u read on the port its the inner dimensions bro 22" inner? and ur at 22" outer.. how is that gonna work i see your using .75 so subtract 1.5 from that 22 so u get 20.5 inner and go from there. thats the ONLY thing i see wrong good specs your port area is on so u could be bangin.

[Not sure where to put this]

Lol nice im just guessing that hes using them as examples but u can tell those are steve's by the removable port and the re sticker on the tool box :01nocomment8so:

[That big brown truck stopped by about 30 minutes ago...]

very nice those look like some hard hittin 12s

[Hair Trick with a pr. of 10's?]

now thats crazzyyy never thought hair trick with 2 10s...

[4 10's in back seat]

are u looking to keep your views out your rear view? if not go with ported one chamber with some 6" areo ports

[Need to get this wiring right]

series parallel. shall give one ohm on 2 duel one ohm subs