[never mind i suck at reading haha]

sonafbitch! i read too fast

[never mind i suck at reading haha]

fail in my part

[Bring out your dead]

What about this lol. They all got the wall socket

haha i remember that day, smelled like coil in your garage for days

[Can i mix rockford power series with punch series?]

Double post ftl

[Can i mix rockford power series with punch series?]

I didnt meanit as a component lol sorry for not making it filly clear

I ment that the 5x7 will have a more bass filled range, not like a sub or anything but it plays fuller lows but lacks a bit on the higher end as to where the 5.25 comes into play and fills the void

[Can i mix rockford power series with punch series?]

In my theory i dont think it will sound bad cause the 5x7 will be your "midbass" while your 5.25 will give you a higher freq range, someone correct me if im wrong tho

[Memphis car audio in Fast Five]

Moar trakshuns wif rear wheight and adds 200hpz!!!

[Gas Gauge Always Reads Empty or Full?]

Fuel pumps float maybe messed up.(if it has one I'm not too smart on that part)

Or some form of electronic.

im gunna x2 on this, my car does this at times too, it could be the floater or there might be a wire making bad contact

[deepsilencer's silverado,it's alive!]

oh i mean the amp.

i think just one aq3500

[deepsilencer's silverado,it's alive!]

so the 15s are temps for now till you finish the box for the 8s?

when are those bad boys gunna be in?

[White on White 24's with 4 T3 Audio 15's]

its either set private or something cause its not available

[Trunk Box HELP]

so you want to aero port the box into the cabin correct? im not sure but i think you are going to need a pretty big aeroport or two per sub. idk tho ive never done aero.

just hang tight and more people will answer your questions.

welcome to smd btw

[Whats wrong with my roommates comp?]

i think if you move the pins in the back you can set it to slave drive, but im not sure lol

[Whats wrong with my roommates comp?]

im not computer guru but i hope psu means power supply unit, it happened to me too a while back idk what i did to dry it on accident i think it was a short to but my computer had the same simptoms it would light up but as soon as i hit the power button it would cut out and die instantly, i had a spare power supply and swapped it out and it worked. i hope that helps a bit

[DC's Slammin Astro Panels and Lights NEW Update!!]

moar picccsssssssss

i wanna see this thing in action

[how to wire my lanzar opti drive 2000d]

what you want to do from here is up to you basicly.

i would personaly just run two subs for now untill you got another sub or got a bigger amp. you can make those two subs sound pretty good in the right box since they will be getting the required power

thats later tho if you want to make one down the road too

[how to wire my lanzar opti drive 2000d]

http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=3&I=42#results

Boom.

Should be seeing a 366wrms per woofer.

since the subs are 1000 rms and the amp is 2000 rms like rebel said they will get 366 each so they will be underpowered

[how to wire my lanzar opti drive 2000d]

I can not find any specs on that amp, I even went to their site and I still couldn't find it.

Where are you seeing its rated .5?

I need to know what coils your pioneers have.

http://www.amazon.com/Lanzar-OPTI2000D-Optidrive-Competition-Amplifier/dp/B0002YU43C

i would say that if your electrical is up to par for the amplifier and the final VC configuration is going to end up being @ 0.65 ohm, yeah do that

this!

if you dont know what he means by electrical up to par meaning your car having *the big three* bigger power wire from alt to battery, engine ground to frame, and battery ground to frame

[how to wire my lanzar opti drive 2000d]

ok im a noob to this site and a noob at wiring systems, learnin more everyday so your guy's help would be nice, ok from my understanding i have a mono block amp and the amp starts at 4 ohms and u divide that by however many speakers you put on the amp, so 2 speakers u would take the 4 ohms you started with and divide it by 2 and then your amp would then run on 2 ohms, im looking to run 3 pioneer premier pros to a lanzar opti drive 2000d so that would drop it down to 1.3 correct? but my speakers are dual voice coil so doesnt that make it almost like 2 speakers in one so would my amp then drop to .65 ohms? and if so would this amp be able to drop so low without blowing fuses? it has a built in fan if that matters at all

you will 99 percent sure pop the fuses, im not sure *too lazy to google* if the amp is one ohm stable, if it is just stay barely above one

[The funniest video i have seen in a while -]

Ive been down for the last two days an this made me laugh, pretty much made me laugh and smile

"dont fuck up mah beer nahhw"

I love when he toys with the cop going up and down

[5 channel with anl meca class]

I doubt they do too

I would just order some stingers if it came down to it but idk

[5 channel with anl meca class]

@skittles. Whats so bad about aug, i heard that they do a few amps less than rated but thats it from what ive heard so far

[5 channel with anl meca class]

Ok ill use one of the glass tube type fuse

Why done the allow maxi btw? Just wondering

[5 channel with anl meca class]

So i need a 80 amp anl or inline to compete in as2 correct?

[5 channel with anl meca class]

I hope im posting in the right area

Long story short idk if im in as2 or 3

I have a single 15 sub and the amp does 919 rms at 1 ohm so is that like 90-100 amps

The amp has a 250 anl but i know realisticly its doing 150 ish cause the mids are wired to 4 ohm and they are taking about 100 each even tho it can do alot more at one ohm. What anl would i need to run *that wount pop* or else i would run a small one and pop it in as1 *not down for that lol*

How is a five channel judged on power. Thanks