jeyrapboy
-
Posts
7533 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by jeyrapboy
-
-
LMFAO! what makes it better is i just switched from my computer monitor to my 32 inch TV so its like 4 times BIGGER! LMFAO! i wish someone would slap them a lawsuit. I think you have seen the lemon head one riding around louisville and many others.
-
LMAO i have seen that before.
-
-
im glad your pleased, now go to bed, your questions are keeping me awake
-
Is it normal for a head unit to not clip the signal at all? I would expect it to at some point.
Well in meades video his stereo clipped just short of being turned all the way up. My buddys can be turned all the way up without sending a clipped single.
-
That's what i expected however i tried it and when I had the o-scope hooked up off the amp with the amp gains turned down I played the test tones and it didn't clip at all. Even when I turned it up to 35 (maximum volume). I guess thats why I'm confused.
Hook up your oscope to the RCAs running to your amp and play the test tone till your single clips, slowly increasing the volume, if it dont clip and you have it cranked all the way up then you HU wont be sending a clipped single. If it does start to clip, note what volume it starts to clip at and make a mental note not to turn it up past that. Then set you amp gains accordingly
-
No because you could send a clipped single from you HU to your amp.
-
Still pretty fuckin sick.
-
i say do it but its lots of work bro!
It might be a lot of work, but when its all said and done i will have something to be proud of. Everyone is telling me to glass the breaks and then just cover it with a cool looking fabric.
-
I also have AT LEAST 2 weeks before this will be happening. So i have lots of time to plan.
-
Resin it's self is not strong. You need to glass and resin if you want strength. Your best bet would be to do the whole thing with fglass and make it look good. Hell, you could custom mount a few tvs or speaker/tweets if you wanted.. possibilities are endless.
I have already thought about the tweets, also i have decided to fiberglass that whole thing and paint it. Have not seen something like that around here. I just have to figure out how to remove the seat belts.
-
put pics up when you do it
I have to! Thats the only way to go.
-
headliners are a little more difficult to work with cuz they cant really get too heavy (unless you can bolt it directly to the roof). wastehog is right. if you want the whole thing to be structurally sound, you have to use both glass and resin. just resin would be adding unnecessary weight. but to be honest with you, your not really gonna be saving a whole lot of money. after you get through buying all the materials, glassing can be a pretty expensive way to go.
Well and new headliner board at the is going to run $250, the local junkyard have tons of jeeps but none that have a DECENT headliner. Also my buddy has 1 gallon of resin to give me, so that covered just got to get the fiberglass mat.
-
-
Damn man that box is lookin good. I still need to build me a amp rack of some sorts
-
Still lookin good man. I wish i could get some shit to do work.
-
Also if you know where to get fiberglass cheap let me know. I can get 8sq ft or 96x96 for 5.99 at my local auto shop and resin i got covered.
-
Okay my headliner broke and i am going to fiberglass the breaks so i wont be out a lot of money. Then i had the idea to go ahead and fiberglass THE WHOLE headliner board, sand, paint, and make it one of a kind.
My buddy said that i only have to fiberglass the breaks, i can just resin the rest.
SO my question should i fiberglass everything, or do i just put on some resin?
I think fiberglassing the whole thing will look better
Thoughts?!
-
Well guys after looking the headliner board i discovered that on both sides there is a 6 inch break so its close to braking in half. I have decided to go the FIBERGLASS route. I am going to fix the break with fiberglass and resin. Then turn around and fiberglass the whole under side. Prolly paint it to match the paint outside or to match the interior idk yet. So if you know where to get some fiberglass mat cheap let me know. AUTOZONE has 8sq ft for 5.99 anything cheaper even online let me know THANKS!
-
Step one: Use use some duct tape on the back of the board to strenthen it and repair the flaking parts
Step two: Goto a fabric store or walmart and get some fabric and 3m spray adhesive
Step three: Apply
I got some headliner glue. Thanks for the advice. I think i am going to go ahead and try to salvage it today. Ill post pics when i am done.
-
Well the board is not THAT bad and the cloth is ok. I figured i would go ahead and see if i could salvage it.
-
Okay my headline was falling down, so i went and picked up some glue so i could take out my headliner and re-glue it, well when i took out the headliner it literally crumbled and i have no idea what to do.
There is more but i didnt feel like taking more pics. So i already know i am leaving it out, but any ideas on what i should put in it place. Serious ideas only. Something that not going to cost a shit ton.
-
If there is enough room ill throw a couple batts in the back.
What kind of vehicle. You should have enough room with some planning.
-
H/O alt
Big 3
I think a 120 amp fuse is what you will need (dont quote me)
Extra batt
That should help out a lot!
.gif){kind=small}
I JUST DONT GET IT.
in Off Topic - Random, Misc posts - the forum "Junk Drawer"
Posted
Yea i have seen them all. They all are usually shit and have horrid systems. I seen the reeses one on my way to walmart motha fucka almost hit me add "no driving abilitys" to the list.