RickyFriery97

im currently runnin 4 l7 15s with 4 crunch gpv 2000.1 i have a 300 amp iraggi alt a xs D3400 up front along with a kinetic hc 800 i had laying around till i order my second D3400 and a D3100 in the back big three done (1/0) when at full tilt i stay above 13volts but when i stop it drops pretty quick can voltage drop harm my xs batts? i plan on getting another D3100 and D3400 and possibly a second alt but for the time being it drops pretty good i jus wanna know if ill harm my batteries (or alt) with low voltage but i an keep the volts up if i rev up or if im cruising

i was just jammin this song when i logged on but in texas i would guess some candy paint but i dk hah

http://www.facebook.com/profile.php?id=100000299947794

yeaa i switched em and made sure its actually for a buudy of mine thats going to buy a xsD3400 for under his hood but i already have mine so we tried it on mine ill just have to figure something out

i have a D3400 under my hood and i have a i bar 555 kit for it and i tried to put this knukonceptz battery terminal on the top post that came with the i bar 555 http://www.knukonceptz.com/productDetail.cfm?prodID=KBT-30P when i tightened it all the way it still came right off what top post adapter do i need to get so this battery terminal will fit the battery?

well before i upgraded the software it worked fine on my ipod cord but with the new software when i plug it in its says error its a iphone 3gs 32g radio is alpine 9886 anybody know why it dosent work? thanks

ok thanks both batteries are resting at 13.0 after being off the charger over night so there good to go

well the batteries are brand new never been installed just wanted to give em a over night charge first but i had it hooked up on 10 amp mode and i put my stinger volt meter on it and while it was chargin it got in the 15 volt area but when i took it off it went back down to the 13 volt area is it ok for the battery to be in the 15 volt area while it is on the charger?

i have a XSpower D3100 and a D3400 my battery charger has a 2 amp trickle charge and a 10 amp fast charge should i use the 10 amp setting the get them fully charged? i think i saw somewhere that 2 amp mode would take a very long time to fully charge a xs battery

yes sir i did i love the battery and will for sure be buying some more untill alll my batteries are XS i plan on having two D3100 in the back and two D3400 up front

I wanna do the same terminals as meades box would I jus need something like quater inch stainless all thread through the box and a washer and nut to the box then the ring terminal for +/- then another box? Will the wood cancel out and power or current? Thanks

what box calculator?

ive got some plans drawn out for a new box i want to build for 4 kicker l7 15s its going in the back of a 1997 chevy suburban the whole tuning and fifuring out how wide/long to make my port is really confusing me so im gunna post the dimensions and if someone can tell me how big to make my port i would greatly appreiciate it i would like to have it around 32-35 hz (outer dimensions) 20 inch high 49.5 inches long 47 inches wide i want two seperate ports with a wall down the middle dividing them jus need to know how wide to make them and how long thanks

yeaa i actually ordered me a D3100 last night to replace my lil kinetic hc800 and ill be puttin two D3400s up front then ill order the vcm

yea i know ima bout to buy either two kinetic hc2400 or two xs D3100 to put in the back and that should be more then enough power its about 30 to 45 min away from downtown houston in the clear lake area

i have been looking into the vcm and just want to make sure everything is going to work right before i plae an order i have a 1997 chevy suburban with the 5.7 motor and a 300 amp irraggi alt ive got one deep cycle battery for startin and a yellow top under the hood and a kinetic hc800 in the back(uprading to two kinetic hc2400s or the xsD3100) my voltage drops pretty bad right now im runnin 4 crunch gpv2000.1 and 4 l7 15s ill be changin the amps out to two kicker zx2500.1 as soon as i get the money if i install the VCM with what i have hooked up right now what would be the best setting for it? thank you