Jagraj7870
-
Posts
393 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Jagraj7870
-
-
i have 2 optimas up front and one xs d5100 in the back. works fine but im gonna switch out to all XS because the optimas sit at 12.6 while the xs always sits at 12.7 and its a smaller battery(d5100)
-
Any others? I am very limited. What about optimas? Again very limited
hey i sent you a PM i live in ontario aswell and i know a dealer thats in Vancouver that sells XS and SMD subwoofers
-
-
no im getting the parts from precision port, like the flares and the coplings and just getting a longer PVC or sono tube which even one is thin walled from home depot
oh i understand now.
hey kranny if i make the box 30 in total in depth and then have the port facing up instead of shooting back towards the trunk i can do a port thats 150^3 and have it tuned to 30 hertz is this good, and also do u think this will do hairtricks and hit around 150dbs
-
I'd do slot port. With twice as much port. That box just seems like it would be suffocating the SMDs
how much port is needed is there calculations for that im guessing 150^3
-
im seriously confused about this box i wanna tune it low so i can do hairtricks the reason why im using Aeroports is so i can keep a good amount of internal cubic feet
-
once again, more port. And you know your ports bend right? You seem to have not taken that into account in the picture. I'd shoot for 14-16 sq inches with those pvc ports. And flare them too.
you know how hard it will be to flare a piece of PVC? let alone 4?
no im getting the parts from precision port, like the flares and the coplings and just getting a longer PVC or sono tube which even one is thin walled from home depot
-
once again, more port. And you know your ports bend right? You seem to have not taken that into account in the picture. I'd shoot for 14-16 sq inches with those pvc ports. And flare them too.
yes i know they flare at the end, but i didn't know how to make that in google sketch up
and if i go bigger port i cant keep a low tuning
-
thin wall gutter tube?
thats what ive been told i can use to make them longer. why whats up?
-
im currently stuck on making my box i have half of my new equipment and the rest is on its way
im using 2 SMD 18s D1s on a Kicker Warhorse
plan on giving it 5000 watts RMS to each sub
i know these subs work well in small enclosures so this is what i came up with
i know the aeroports are only 17" long but ima use thin wall gutter tube from home depot to adjust that
thanks for any advice
-
okay thanks but would this do hairtricks? is there enough port area?
Hard to say until it's all said and done. There's no standard formula for doing hair tricks.
yah but i know u have to hit 150dbs around 30 hertz
-
so you can just buy the aeroports in pieces?
I believe you can at the psp-inc website.
www.psp-inc.com
okay thanks but would this do hairtricks? is there enough port area?
-
-
but you keep forgetting the max length of the aero ports is 17"
I said before that you're going to need to make them long by going out and buying your own thin-wall PVC...contact psp-inc about getting just the flares and coupling rings, and buy the PVC yourself. 17" port length is going to give you a 36hz tuning.
so you can just buy the aeroports in pieces?
-
And actually, if you want to just do a double baffle and have it one layer everywhere else(with adequate bracing), you can do something like 11.5ft^3 at 33hz with 21" long ports. That will give you 4.25" from the back wall once installed, which is fine for an aeroport.
the bracing im gonna use is gonna be a 2x2 steel tube and also ima resin the inside and make the 45 degree angles
but you keep forgetting the max length of the aero ports is 17"
-
the max length of the aero ports is 17inch
-
can you suggest me a box using my dimensions this port thing is so confusing i thought if the port area was within the port range your good
-
so i wanna fit 2 18s in my jeep wrangler i currently have 1 right now, i wanna be able to do hairtricks easily and also to hit around 150dbs
heres the box idea i came up with
im gonna be powering it off a Kicker warhorse and i wanna be able to hair tricks
if someone can help me that would be appreciated
each SMD will be getting 5000 watts
-
wow that thing is sweet does the bottom part light up like the LED indicators on the T2500?
-
im thinking about upgrading my electical for my warhorse to im thinking about in the back 4 XS d3100 and 2 DC 270xp for my jeep wrangler, for the front right now i have 2 yellow tops under the hood
-
-
Actually I could be wrong but the warhorse is not 1ohm stable. It puts its power out at 2ohms. So you need 2 d2 subs not 2 d1 or d4. If I am right then you would only need to buy one new d2 sub cause you already have 1 d2 right?
thats what i thought, acutally thats what everyone thought but the CJ18 told me no u need to D1s and then i confirmed with KIcker and there like yah u need 2 D1s and you have to wire them push and pull because the kicker warhorse isnt a common amplifier and requires a different way to wire it and shit so i was like fuck lol but then i already had the amp so it was too late for me to do anything now i guess its either i recone which ive never done and don;t know how to or buy 2 d1s
also the SMD i have right now is number 35
-
the t4000 is still amazing ima sell that and my current D2 SMD 18 so i can buy 2 18 smd D1s bcuz i didn`t know that inorder to run 2 subs on the warhorse they have to be either D1s or D4s
Why not just get recones? It's a whole lot more affordable.
really that seems hard to do tho and i didn`t see anyone do it for the smds yet and how much do u think they would cost
It would be easier and cheaper than selling the one you have just to buy another one.
how much do you think it would costÉ a guess like 300
-
the t4000 is still amazing ima sell that and my current D2 SMD 18 so i can buy 2 18 smd D1s bcuz i didn`t know that inorder to run 2 subs on the warhorse they have to be either D1s or D4s
Why not just get recones? It's a whole lot more affordable.
really that seems hard to do tho and i didn`t see anyone do it for the smds yet and how much do u think they would cost
SBN 2011 Part 1
in Member Videos - Host 'em & Post 'em! System Vids / Off Topic
Posted
hey what was wrong with the guy in that green pick up it kept cutting out
nice vids