-
Posts
12711 -
Joined
-
Days Won
9
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by hdorre
-
-
no sorry i dont have any knowledge about them and they are tough beast man just be smart with no clipping and you'll be fine
Thanks for the input though. I am doing some research and checking reviews on the Audioque and didnt find anything negative. I like their price too..to bad theyre out of stock tho. Ill probably wait and get 2 Audioques.
Do you think I should put 2 "stock" Qs on the AQ2200 and wire it down to 1 ohm. Srry, Im kinda new with all this
-
well is should get damn loud either way if you dont have an idea on amps i'd say either to AQ2200's or one AQ 3500.1
my fi q with bp takes a aq2200 at ohm daily so it can take the power
Thanks, if I get one I'd put 2 Qs on it. I don't wanna have to worry about it blowing. I was also checking out the Soundstream DTR1.2200 because i know that it's rated at 14.4 volts. Do you know anything about Soundstream and know if that rating is true?
-
i'd go with the BTL's but try to get more airspace
I'm getting a small Mazda Tribute though so at a decent height, I only have 13.2 cubes in my cargo area. If you add sub dispacement, port displacement, and the wood to make the woofer I have about just over 10 cubic feet of airspace. I'm thinking the Qs just based on the airspace
-
Depends on impedance rise, voltage drop, ohm load, supply current, wire gauge, etc.
Let's be somewhat general because I don't have all the stuff yet. Let's say 1 ohm, 1/0 gauge wire, and with the voltage dropping to 13.5 volts at the most
-
One more question..how many true watts do you thing the 2010d would put out at 1 ohm
-
In imho the 4 q's. More motor force. Plus I wouldn't put them BTL's in that small of a box with that little power. Go more like 7cubes per.
Im getting a small Mazda Tribute so I dont have that much room..only 13.2 cubes and thats not including the port, sub, and wood to actually make the box.
-
Which setup would play louder and hit the lows better?
4 12" Fi Qs
2 Hifonics BXI 2010d amps (2 subs per amp wired down to 1 ohm)
A ported enclosure tuned to 30Hz with 2.2 cubes of airspace per chamber.
OR
2 18" Fi BTLs
2 Hifonics BXI 2010d Amps (One per Sub wired down to one ohm.)
A Ported enclosure tuned to 30 Hz with 5 cubes per chamber.
-
Which setup would play louder and hit the lows better?
4 12" Fi Qs
2 Hifonics BXI 2010d amps (2 subs per amp wired down to 1 ohm)
A ported enclosure tuned to 30Hz with 2.2 cubes of airspace per chamber.
OR
2 18" Fi BTLs
2 Hifonics BXI 2010d Amps (One per Sub wired down to one ohm.)
A Ported enclosure tuned to 30 Hz with 5 cubes per chamber.
4 fi Qs or 2 BTLs
in Fi Car Audio Subwoofers
Posted
Damn, thanks for ur answers and advice. I'll be getting the car and equipment in a couple of months when I turn 16