-
Posts
103 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by mike fallon
-
-
steve I would look into test driving the new V6 ca and see what kind of deal they can get you on that. If it helps tell them you have a friend that works for GM that will give you a discount.
-
I would run the ports at the top firing into the cab, ala hoopty ports
-
They need a lot of input current not voltage and the signal voltage can cause you problems in the input section if there is distortion in the signal path
-
Interesting combination of parts. It looks impressive and I think that a back mount plate on a front mount double baffle would work out well, but I wonder how the airflow around the motor would work out in terms of increased pressure behind the cone.
-
ft wayne in july and bunches around depending on where in the state you are.
-
What I should have said is if its not too pryin to ask, how did the change from one extreme to the other take place?
I thought he was a native american. Something about casinos
-
Just keep more money in the bank and don't overdraft.
Having money to pay for things FTMFW
-
yeah at school my doors are locked and its parked right in front of the office and school so if anyone is dicking with it someone will see
But my car is also like 3k and my system is prob like 1k
But will they care?
-
Magic mate is 13.75x19.685 inches per sheet or 270 square inches or just under 2 square feet.
Normally it is just over $50 a sheet, but I entertain all offers.
Maxximus is 1800
Cyclops 700
Brutus 200
If you think the prices are high then make me an offer when you have the cash in hand. I am tired of people offering me money then not having it If you are ready to buy then make me a decent offer and we can talk!
-
NVM.
I read up on installation. :shot:
LOL what did you find out about installing it!
-
I am in Cleveland Ohio and How much deadner do you want?
-
i bought it from auddiosavings. i emailed them and told them that the amp doesn't work now. but didn't tell what exactly happen, do you think they will replace it?
I don't think they can give a factory warranty and they don't have them listed on the site anymore so it might be sent somewhere for repair.
-
Still have a bunch of stuff!
Added to the list is a bunch of MM400 Magic mate.
When installed it works better then 4 layers of Dynamat extreme.
Normally $50 a sheet plus shipping from Germany.
Make offers.
Also RE MT motor.
-
Update.
Autoteks are sold.
Batcaps are gone.
Email me any questions
-
For those times when you need a disposable e-mail.
Use this:
anything at Mailinator.com
it creates the address when mail comes in.
You can only use to to receive. There is no password so anyone can view if they know your addy and it deletes all mail after 24 hrs.
-
you wont find any pic's or anything with chicken in it, if he wants to post up his pics, Im sure he would, I honestly wouldnt post my picture up if I was him, he has posted a few times, he was the very first member of the forum.
-
Well this season I had 5 cars I competed with and next year I am dropping down to one with a mission. So everything else is going including the cars.
-
Brutus
Cyclops
Pro Comp SPL3 18's Dual 1.4's
RE MT 18's (2) Dual 1's (1) Dual .7
GX3000s 500
MT18s 500
Mt 15 400
Procomp 18 500
All are starting points with shipping.
-
Its time to clean the garage out and make room for toys that pay for themselves.
the list!
Speakers.
2 Pro-Comp SPL3 18s
2 RE MT 18 d1
1 RE MT 18 d0.7
1 RE MT 15 d1
2 Atomic APX Flat Back Motors
3 Hifonics Brutus 10d4
2 Hifonics Atlas 12 Square D4
1 Hifonics Olympus 2412
Orion Cobalt 8s--gone
??? 8s--gone
ED k15
Amplifiers
Coustic Amp-460-gone
2 Soundstream REF-200
1 Hifonics ZX4000
1 Hifonics ZX6406
4 Hiconics GX-3000s-3 gone 1 left
3 Autotek MM-3000.1-gone
1 Hifonics XX-Cyclops
1 Hifonics XX-Maxximus
Radios
3 Kenwoods not sure on Model 2 high model Excelon for last year and another I used as an external for my van that has a remote.
Older Eclipse ESN
Wire/Batts
Runs of 1/0, and MCM 250 abound 17-20 feet long
2 2150s
More as I run across it, and prices as I think of them. Offers welcome and usually anything decent gets you what you want
-
That system was supposed to go in for a single show then get taken back out
BUT......
It actually did OK, so it stayed in for about 6 months.
We put it all together in around 5 hours start to finish and after 6 months things like the temp beauty panels broke apart
SO I decided it was time to change.
Now I have some decisions to make.
First what amps and subs to use.
I have a few amps hanging around gathering dust that I might have to pull out and see how they fit in the car.
-
Its what I have to work with right now.
I don't usually have pictures of my cars but on the rebuild this time I am actually going to take some!
This is going to be a slow rebuild as I have very little time to work on it.
It won't be as pretty as what yall do but I am a dB Drag guy!
First a few pics of what was in it that I got sick of.
-
I am in ohio. I have 18s, 15s and I think 12s
-
What kind of airspace and port area do you have in that?
-
What are you looking to spend and where are you at?
The shipping on one of those things is killer.
Thinkin Of A New Car: Got Caddy Cts On The Mind
in Off Topic - Random, Misc posts - the forum "Junk Drawer"
Posted · Edited by mike fallon
cts has $2500 cash off or 0% and supplier price should take a DI down to around 40 for a new car.
Oh and the cts has quietsteel in the car!