Kjbulldog
-
Posts
54 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Kjbulldog
-
-
I too like the horizontal logos
-
lol it looks like his rearview mirror fell off too...and how did he make the flares? Ive always wondered why i dont see anyone doing this because it seems like all you would have to do is heat up the end of the pipe and bend it out, although i never thought to use something like that wooden piece with a radius to press it on
-
i cant even imagine what the inside of that car smelled like
-
i have 2/0 welding cable thats pretty much equivalent to knu 1/0 in mine and it fits...its underrated like most other sundown amps. Mine is wired to 2ohm and the sub im running now is rated at 600 rms which is also what the amp is rated at for 2ohms but if play it wide open i start smelling coils and the dustcap gets hot...I love this amp
-
That was presale. They are now 129+shipping but they are sold out right now
-
looking for a sundown sae-1200d bass knob that works
-
i think it would be cool if you took some old old caddilac tailights and did some body work and put em on there...maybe some of the old bullet styles recessed in...just an idea but it would be different and still caddy
-
Sup Guys,
Would 3 of these work well with 3cuft airspace tuned to 38hz with 1000w rms total, Reason I ask is that I want to just pull my 15" out, and drop 3 of these in.
Jacob recommended .6-1 cubic feet each and since you will be below the rms rating I don't see a problem with a 3 cube box for 3. If you ever adde any power though you would probably want a smaller box
-
That's right my prots stick out like 8" the lower the frequency the longer the port looks goofy as hell but awsome sound is more important than good looks haha
Yeah I was trying to do a slot port but I might not be able to since the box is so small. What are your box/port specs?
-
Am I doing something wrong? I'm trying to get my port size down and for .6 cubes at 33 hz and 9.75" of port I'm getting that my length should be like 33" long which is too big for the box. Does this sound wrong? Or any ideas to shorten it without getting the port too small?
-
Does anyone know if the SAE-1200v1 and the SAE-1200v2 uses the same bass knob?
Did you ever find one? And Derrick did you have an extra one for sale?
-
Pandora is pretty cool too. And it'd be cool to watch movies and have the Internet. I can't wait to see tripps finished truck... It's pretty much everyones dream build
-
I also need a bass knob for a sae-1200d v1 if anyone has one
-
There's a Guide in the for sale section
-
I want one of these subs... where can i one at ASAP? any dealers in CA? Let me know, i need this BAD!!!
If you have to have one you may find one for sale from somebody. I found one on caco so I'm just gonna run one until the new shipment
comes in
-
-
Got a Mmats D1100.1 for $350
Thanks man but that's out of my price range right now
-
Thanks. Does this box design sound good if I'm gonna run it at about 500 watts under the back seat of a chevy truck? I like the lows too
-
budget is less than 150...tight i know but i wanted to see if anyone had anything else on here before I buy an audiopipe for 140
-
im building a box for one of these and I was looking at .75 cubes with a 2" aero about 8" long for tuning between 34-35 hz and in calculating my total box volume I've added the port volume and I was wondering what the sub displacement is to add in. I think I read somewhere that it was .1 but I wanted to make sure.
-
Looking for a decent amp that makes around 800-1000w at 1 ohm for pretty cheap
-
You could look into preordering some sa-10s
-
On mine the red wire is like supposed to run to the harness the key is connected to, like a remote wire so it comes on when I turn the key on. Mine wouldn't come on either til I hooked it up. But instead of messing with the ignition harness I just ran it to a fuse in the fuse box that gets power when the key is on
-
Any help guys? Sorry if it was a dumb question
No Bass Coming out?
in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Posted
Mine just started doing the same thing...sometimes it works fine, sometimes it sounds really distorted and sometimes there no output at all, and other times there is no output. The whole time the power light stays on but when it sounds distorted the protection light blinks. i figured it was a ground or rca problem but i checked both with no luck. Was your protection light coming on while it was doing this too?