[Three E8's in rear deck]

We are gonna build the enclosure under the deck then. Someone already cut out a square in the deck and put a Sony 10 in it. Horrible job too.

[Three E8's in rear deck]

I'm thinking of a new build for a friends car. Looking to put three e8's in the rear deck. How would these work in freeair? Should I build a box under the deck for them?

[Fitting two 15's in a trunk]

Now I have everything firing forward sealed off. I've done the measurements and I can fire the 15's forward sealed too. Would probably need to build it in the trunk though.

[Fitting two 15's in a trunk]

Current setup is 2 Skar 12's on a audiopipe 1000w.

Not 2000w each. I'm thinking of doing a Memphis amp. Found a good deal on one

[Fitting two 15's in a trunk]

It would be 2000w a pair. I have 2 12's right now. 15's in a trunk is not something you see a lot. I'd like to try it.

Are there any subs that work well in a smaller box?

[Fitting two 15's in a trunk]

I'm looking to put them on 2000w maybe 3000w. Depends on how electrical upgrades go

[Fitting two 15's in a trunk]

After my recent upgrade I noticed I can easily get around 6cu ft out of my trunk. Current box is 5cu ft. I'm thinking of making my next upgrade two 15's. Are there any subs that will work great in that space or should I look into squeezing more space out of there trunk?

I was thinking SA-15. I'm working on a recone of an older Memphis mojo now. If I can find another I may use that.

[Cheap 0gauge!]

I'm kinda interested but yeah it looks more like 4 gauge. Comparison pic would be great

[BassJunkies Electronics Sale! Something for everyone!]

I'd like to know the specs on that laptop. I'm interested

[Should I get a mojo]

Fi said they don't know if the basket can be reused. Anyone ever recones one of these in the orange basket before?

[Should I get a mojo]

Oh I have two.

[Should I get a mojo]

I know they unbolt. I already looked at it and cleaned it up for a recone. Trying not to buy the whole cartridge thing. I sent for a quote from fixmyspeaker.com. Any recommendations on options? Anything that's a must have

[Should I get a mojo]

Will the recone be better then the original? What options do I have with upgrades? Spiders, coils, etc

[Should I get a mojo]

Do you have a link to the video? iPhone won't view it like that

[Should I get a mojo]

Is that a 12 spoke basket?

[Should I get a mojo]

I have a chance to get an old orange basket Memphis mojo 15 for $25. It needs a recone. I currently have two Skar vvx-12's. Is this worth it?

Any suggestions on where to get a recone and how to go about it? I already asked fixmyspeaker.com for a quote

[Sundown e8v2 in a single cab]

Well my friend still wants the seat to go all the way back. I'm working with 16h x 6.5d1 x 5d2 x 25.5w. That's for one side behind the seat so a total of ~63w for the whole truck. I'm thinking either two boxes amp rack in the middle or one box ported in the middle.

[Sundown e8v2 in a single cab]

Yes I know the recommended space. I really want to know how I can expect them to sound on a range of music

[Sundown e8v2 in a single cab]

I'm putting 2 sundown e8v2's in a single cab chevy 1500. Space is pretty limited. I need them to sound good on most types of music so I was gonna tune low for a flatter response but can't seem to fit the port in. Even external port Wouldn't be easy. Seems like I'm stuck going sealed. Does anyone know how these subs sound sealed? We don't need huge spl just want it to sound good one everything. Any suggestions on box volume or anything are greatly appreciated.

[your opinion]

I've had the older mofo with the aluminum dust cap. They get pretty loud but don't sound that good. I recently installed them in my friends blazer

[Stripped terminal]

Anyone know where to get a new screw? I will need a new one after tapping. Some metal is stuck in the threads and it is almost to small now.

[Stripped terminal]

It seems to be really soft metal that would tap very easy. Even after I did that wouldn't I need a bigger screw?

[Stripped terminal]

I have an audiopipe amp that has one of the speaker terminals stripped. The screw part is fine, but the part it screws into is totally stripped. Is there any way it fix this? Could I get something larger to use as the screw part?

[2 Memphis 15's]

I built a box for two of those. It was 6 cuft @ 35Hz. We gave them 500w, so 250 each. They moved a lot and got pretty loud. How did you setup the amp? DMM?

[Heres my box design:)]

My box is almost identical to that one. Except mine is 4cu ft @ 33Hz. How does the port with the flange sound? I may have to do that with my box. Does it have any port noise?