[California Love - Rusko Dubstep Remix]

I knew I heard this before.. here it is in a mixtape.

DJ Sashwat - Presents Dank 'N' Dirty Dubz (Volume 4)

http://forums.di.fm/dubstep/dj-sashwat-presents-dank-n-dirty-dubz-volume-4-a-194068/

The whole song list as well

[Quote please]

I'm looking for an alt for my 1990 Honda CRX. D16a6 motor. Let me know what you have, Thanks

[Small ported box or sealed?]

I shouldn't need to say this, but describe optimum. I'm already going to throw more power at them than RMS. That should show I trust their quality =p

I ran my 15" Audioque HD3's @ 0.5 ohm with my 2 zx2500.1's =D 300a of alt, 5 blue tops, 6ft^3 of enclosure. tuned low. I did a 149.7 @ 32hz lol (blew 1 sub eventually)

But yeah I figure the enclosure is small enough that I shouldn't have a problem with this setup. I won't get maximum performance out of the subs but sometimes a reliable system trumps performance.

[Small ported box or sealed?]

Well it's in there.. Now I need a real alternator! 60a isn't going to cut it.

[Small ported box or sealed?]

Here's what I have.

2.47 ft^3

0.21 port vol

I just don't want to go with a sealed design if I can. This will leave 1.235 ft^3 per woofer.

[Small ported box or sealed?]

Sealed box: H-Qts .2-.4 cuft

Ported box: .6-1.2 cuft @ 33Hz

This is whats recommended on Fi's site. That seams awfully small..

[Small ported box or sealed?]

I have 2 Fi SSD 10's that'll be powered by a kicker zx2500.1

I have room for a box that is 27x19x12

I'd like to go with a ported box tuned to 35hz. I'm already pushing these subs with the power is it a good idea to just go with a sealed box?

For a ported box, less ft3 = better able to handle power right?

I'll design a ported box but I'll be looking at probably 1.5 ft3 depending on the size of port.

Sorry guys I've been out of car audio for a couple years so bear with me lol

[What 10" subs can handle around 1200w?]

Thanks alot for the quick response guys, I know a local DC dealer so I'll check out his pricing. If I'm not impressed I will order some SSD's. Originally thought I'd go with the BL line but if the Fi SSD will handle the power I might as well save a few bucks.

[What 10" subs can handle around 1200w?]

Pretty simple lol, I'm in the market for 2 10" subs that will be ran of a kicker zx2500. I'm not up to date with the products on the market right now..

Suggestions?

[Just a teenager complaining]

I got fucked a few times in high school installing peoples shit, now I've been out for 3 years. I REFUSE to install, fix or sell a vehicle to someone I know. Unless they're a very close friend or they know exactly what is going on and help. Sold as is where is. The social part is worse, thats why it was a no no for me.

[4/0 wire]

I ran 2/0 on my last system cause the welding shop I went to ran out of 1/0 (same price) I don't really see the point unless you can get it for a good price

[ultimate gas mileage]

Its their job to take anything and everything seriously and proffesionally or they get in trouble with their bosses. Reason being we, citizens are so critical of every move they make. He wasn't a dick he was doing his job the way he was trained. It was a safety issue, maybe these tree huggers should have tested it on private property

[Dump Truck hits military grade concrete.]

Thats impressive! Dump truck was empty I'm guessing.. Wonder what would happen with a truck that is 3-4 times the weight

[Really long signatures]

I'm trying to look at some threads, every single post has the persons normal sig, then a huuuuuge blank spot. Its freezing my computer, I can load a thread with a few posts but no more. I havent been around for a while, forum design just changed? I love the look but I'm confused whats going on with the signatures.

Can someone shoot me a pm, maybe I have a setting wrong on my computer?

Thanks guys

[Zade is drunk posting.]

I'm loaded as fuck right now. Too bad this threads a week old

[Sport Bike?]

my first two bike where lower level 600's (97yamaha yzf600r & 96 suzuki rf600r) just gotta respect them. i looked on the calgary alberta craigslist and the a 99 honda 600f4 damn fine starter bike just look around

Thanks for the info man!

craigslist is alright, we use kijiji.ca ALOT for classified around here

[Got Me A Shop Finaly]

Looks cold... lol

This is what I need to find, but it seems everyone wants $2000+/mo around the edmonton area.. Does it have 220v? Know how thick the floors are?

[Sport Bike?]

Nope, fuck all for experience but I'm sure I'll catch on quickly.

I was actually looking at some 250's, looks like it'd be plenty of power

[Sport Bike?]

Lets make this a little more open, I'm just interested in getting my first sport bike..

Anyone recommend size? Brand? year? What to look for?

Thanks

[Sport Bike?]

edit

[Dumping My Rex]

Its all about inflation though... In ft Mcmurray they'd prob want $500.

Maybe next time down in the states I'll get some for cheap, the car is done minus tint (visually)... I'm on my 3rd block tryin to get this thing running right.

[The Ride I Hate Myself For Selling Thread]

I did all the work on this car when I was 17, then sold it and totally regretted it. But now I'm building a replica

[Post A Picture Of You And/or Your System/ride! (online Carshow/meet And Greet Inside)]

Thanks man, I'm a month away from paying it off THEN I can have a little fun with it.

[Post A Picture Of You And/or Your System/ride! (online Carshow/meet And Greet Inside)]

I'm Cam, 19 years old from Alberta Canada...

Here is my 90 CRX and my 00 cummins.. I also have a 90 civic hatchback that I daily drive. Its just got a low line 12" DD

I have a couple kicker 2500's, buncha batteries and 2/0 laying around waiting to go into the CRX

[Dumping My Rex]

hahhahahahaha kinda looks like it eh

Well here it is atm beside my truck. I still gotta get 5% and 50% on the windshield (shop wants $400... fuck)