jrockman

Ok the 3 sub setup is pounding quite nice, all 3 Audiobahns are getting along: Ive wired them one voice coil from each sub to an amp and the box used to be ported with a simple hole drilled out the back but since Ive sealed the port and did a leak check the quality of the bass is just amazing!! The box everyone is in is open inside so they all share the same 4.5 cubic ft of air. Another question Id like to ask if I can get away with it is, the box is made from MDF and I want to fiberglass the inside and repair the subwoofer mounting face (the part where you screw in the subs) cause Im just not getting that resistance when I push the subs inward (not a perfect seal). I guess is it a good idea to fiberglass the box or should I just use some clear silicone all around the joints??? Am able to do great fiberglass work.

Ok with the current feedback my 2nd question would be: If I ran 3 of the Alumq12's with two amps would it be best to run a coil from each sub to an amp or wire 2 subs to 3ohms on each amp and the 3rd sub a coil to each amp? I have run 2 Alumq12's and a Niche audio 1200 Ho wired down to 1.5 ohms (it reads higher ohms with all the wires) off one 2ohm stable amp before and have had no problems/shutdowns but now I have 2 amps and just want to put out more power. Aside from what was said I believe my Falme Q can handle the xtra power with its lower impedance coils, it is a beast by itself, I thank you all for your input.

Ive been collecting some Audiobahn subs and had a thought of how to wire them up best. Ive got 2 Alum12q's rated 1000 rms with dual 6ohm coils and a 1206t Flame Q rated 1100 rms and dual 4ohm coils and Ive got two 2ohm stable mono amps: would it be better to wire one voice coil from each subwoofer on each amp OR wire each Alum12q to 3 ohms with one coil from my Flame Q? I have already constructed the box on paper just need to build but I really want to run this setup without trading out or using different equipment. I have an idea that a coil from each sub on one amp would be the best way but havent ever found anyone with different spec subs like I have.