Jump to content

Cynner

Members
 View Profile  See their activity

  • Posts

    136

  • Joined

  • Last visited

 Content Type 

Posts posted by Cynner

  1. Removing Thin Plastic Film Protection

    in Interior / Exterior / Paint - Detailing, washing, waxing,tricks of the trade!

    Posted

    Hi Guys,

    I had a protective plastic / vinyl type film put over the lid of my ute about 7 years ago. I'm wanting to remove it because the plastic has scratches etc in it. I'm having a really hard time removing it though, when it comes off it's very dry, and brittle. So it's only pulling off a few inches at a time and I have an entire lid to do. Which is 65% of the ute. Any suggestions for removing it? I've tried heating it up but it only sticks more.. I also CANNOT ruin the pain as the pain under is still in brand new order because it's been protected for 7 years.

    Cheers.

  2. help box design?

    in Subwoofers / Enclosures

    Posted

    Hi Mate,

    Can you please post what type of box you would like (eg: Ported, Sealed, Bandpass etc) what subwoofer you're using, and the dimensions you have to work with at the most and what type of bass you're looking for, sound quality, deep bass, one note wonder etc. Then I'm sure we can work something out for you.

    Cheers.

  12. Foresee ANY PROBLEMS?

    in General Audio - Can't find a category for your question? Ask here.

    Posted · Edited by Cynner

    im not an expert in car audio im a IT guy with too big of a paycheck and like my music loud heres some of the car.. it isn't finished still a lot of fibreglass work to do

    dsc01625.jpg

    bahaha theres a lot better on this forum but it isnt close to finished still lots o work! but its completely built into the car braces with steel beams! half roll cage holding it in going to upgrade subs eventually..

    JUST NEED A GOOD AMP!

  14. Foresee ANY PROBLEMS?

    in General Audio - Can't find a category for your question? Ask here.

    Posted

    well I haven't bought it yet, I could get one amp that can power all the subs. Got any recommendations? I'm running 3 L7 15's I'd like at lest 1250RMS going to each as it's a daily.. if I blow one I dont care I can replace it but I'm in Australia so shit is limited as hell. got any ideas? got 900 AUD sitting in my bank now and my dollar is worth more at the moment so I've got 3 dollars extra! ;P

  16. Hyundai Getz - Quote Please

    in MechMan Alternators and 12v Accessories

    Posted · Edited by Cynner

    Hey mate, I'm so over waiting on DCpowerINC.

    Posted on: 21 September 2010 12:57 AM - This is when I first contacted DCPowerINC last year and this is my last post to them yesterday.

    Hey guys, any update? Been waiting since last year. My entire build has been on hold since December waiting on an alternator. I keep getting next week, I know you're busy but can you deliver or not? I really hope I didn't waste 6 months waiting.

    Look I'm over waiting for DCPowerINC. The only reason I was going with them is it was a bit cheaper. Can you re-quote me on this alternator. I need the highest output possible @ idle I'm not sure if your prices have changed recently. I don't mind modding. As long as it isn't to extreme but I need to be 100% sure it will fit my car. As I'm in Australia shipping it back isnt really an option if something goes wrong.

    Thanks,

    Dylan.

  18. 5000 wRMS

    in Electrical-battery- Alternators- Wiring

    Posted

    Hey guys, need advice on running 5000wRMS. What am I looking at for electrical? I live in Australia so the only thing available are yellow tops and DCpower or mechman alts. Have big 3 done have enough 0 gauge to choke a building so working out what else I'm looking at. I know it isn't a lot to most of you, but I'm limited with funds at the moment. Blew it all on my previous build. This is for another car of mine which also isn't done.. haha.

  20. Hyundai Getz - Quote Please

    in MechMan Alternators and 12v Accessories

    Posted · Edited by Cynner

    Hey Mate,

    As much as DC Power sounds good, I'm over waiting on them. They keep dodging me around. Telling me, " Were just waiting on a new alternator that will be perfect for your car! Will be done next week! " 5 months later I'm still waiting and they keep giving me the same over and over. My build has been pretty much waiting on an alternator and a few other things to be finished.

    I'm running about 7,500watts RMS and I need something that will fit my car. Here's the catch, I live in Australia (Tasmania) and will need it shipped internationally. So, that being said let me give you some information on my car.

    It's a 2008 Hyundai Getz 1.4L 2 door hatch.

    ALT251B.JPG

    alte.png

    This is the current alternator that's in it currently and a list of (other) makes with the same exact model alternator just in case you need to reference.

    Hyundai Accent 1997-2003 with G4EC 1.5L Engine

    Hyundai Accent 2003-2008 with G4ED 1.6L Engine

    Hyundai Elantra 2000-2003 with G4GB 1.8L Engine

    Hyundai Elantra 2000-2008 with G4GC 2.0L Engine

    Hyundai Elantra 1995-2000 with G4GMR 1.8L Engine

    Hyundai Excel 1998-2000 with G4EC 1.5L Engine

    Hyundai Excel 1998-2000 with G4FK 1.5L Engine

    Hyundai Coupe FX SX SFX 1996-2001 with G4GF 2.0L Engine

    Hyundai Coupe FX SX SFX 1996-1999 with G4GM 1.8L Engine

    Hyundai Getz 2002-2006 with G4EC 1.5L Engine

    Hyundai Getz 2003-2005 with G4EA 1.3L Engine

    Hyundai Getz DOHC 2005-2010 with G4ED 1.6L Engine

    Hyundai Lantra 1999-2001 with G4GF 2.0L Engine

    Hyundai Lantra 1995-2000 with G4GM 2.0L Engine

    Hyundai Cerato FE22 2004 Onwards with G4GC 2.0L Engine

    Hyundai Cerato FE24 2004 Onwards with G4GC6 2.0L Engine

    Hyundai Tibouron 2002-2003 with G4GF 2.0L Engine

    Hyundai Tuscon 2005 Onwards withG4GC 2.0L Engine

    And in case you need the exact measurements and specs of current;

    Specifications

    Voltage:12V

    Amperage:90Amp

    Mount Top-Bottom Hole:173mm

    Inside Leg Measurement:55mm

    Front Leg Mounting Hole:8mm

    Rear Leg Mounting Hole:8mm

    Adjust Mount Hole:8mm Threaded

    Pulley:60mm

    Pulley Diameter:4PV

    Regulator:Internal

    Shaft:17mm

    Now I've given this ALL to DCPower around 5 months ago and still haven't gotten a YES WE CAN or NO WE CANT. I just get SOON!

    I really hope you can help me mate, I'm desperate.

    Hope to hear from you soon!

  22. Triangle Port Question

    in Subwoofers / Enclosures

    Posted · Edited by Cynner

    Hi Guys,

    Having a bit of trouble here.

    My box size;

    38" Wide

    35" High

    25" Depth 1

    30" Depth 2

    I was going to tune it to 33hz unless someone thinks I should tune otherwise to something more / less.

    Running 3 kicker L7's but currently have square ports currently but was going to convert them into Triangle thought it would look a lot better. I'm going for pure SPL not SQL in the least. Can someone help me work out the sizes? I've tried doing the math it's fairly simple but for some reason I dont think I'm doing it right.

    Here is the current box, this was a picture taken last weekend. Its not even close to done.

    dsc01442cd.jpg

    Thanks in advanced, hope someone can help.

  23. Lot's of Choices! Ordering monday!

    in General Audio - Can't find a category for your question? Ask here.

    Posted

    derricks car with the lvl 5s in it fuckin rocks. i hate l7s personally, so if it was me id hold off for a fewe more days and get the dcs or check on ascendant mayhems. the same guy that make fi makes the aas ascendantaudio.com.(or u can call brian hes a aa dealer 1-940-594-5601) i have 2 mayhem 18s and will never get rid of them 8)

    Thanks for the info mate. I will be calling them ASAP and get some prices. I'm still buying the L7's just because it's a really good deal.. I'm also going to buy a project car soon just for audio projects. So will be doing something crazy.

    FYI, even when you find out the level 5's pricing, you can't post it...Unless you can find a dealer that would give you a price anywhere close to the L7s, I'd do the L7s. There's a huge price difference between them and their nearest competitor.The Level 5s are beasts, but I doubt you'd get a price close to the L7s.

    Yeah thanks for the heads up mate. I'm going with the L7's for now. When I take a trip back to America later this year I'll bring back some stuff with me. ;]

×
×
  • Create New...