Ok guys I have had a horrible day with my audio. I have 2 inch Alpine Type R's wired to one ohm and a sundown saz-1000d amp. But today I was bumping for a short time for a parts run. I noticed my bass was not pounding like normal, I have had a problem with my box sliding around. Once my wires came out of my box while i made a hard turn, I fixed it asap. That was a few weeks ago and i havent had that problem sinc. But after I made my parts run I decided to check out my box to see whats up. I left the music on a high volume and as soon as I opened my trunk I smelled burning and looked at my subs to see one out of phase and blown. When I got home I checked over everything,my wiring the same no change everything connected good. Then I cut my car off then went isinde, then came back to turn it back on...my amp would not turn on. I checked the rcas and all 3 fuses and it was all fine. Then I opened the hood to check my inline fuse, my fuse holder itself. My fuse holder began to melt itselff to my power wire on both ends!! The fuse inside was not blown but the fuseholder and wrie began to melt together. I switched to a different fuse holder same type and fuse and my amp worked. So I have a fucked up unusable fuse holder and a blown sub. I am more worried as to why the holder melted, anyone have any insight or advice???
i
edit: I took my subs out of the box when i got home. The voicecoils in both subs are still shiny as hell. But the one that I think is blow is hot to the touch and stinks, But both look fine...