Jump to content

AA98hoe

Members
 View Profile  See their activity

  • Posts

    3711

  • Joined

  • Last visited

 Content Type 

Everything posted by AA98hoe

  1. AA98hoe
    i think they have to be 1.4s to get to .7
  2. AA98hoe
    Id do 10 cubes after disp with 16 to 18sq" per cube tuned to 35hz oh and what vehicle sir?
  3. This post cannot be displayed because it is in a password protected forum. Enter Password
  4. This post cannot be displayed because it is in a password protected forum. Enter Password
  5. AA98hoe
    that or mdf and round over both edges. id do allthread myself all the way through the box and port
  6. This post cannot be displayed because it is in a password protected forum. Enter Password
  7. AA98hoe
    What tuning does that length give you?
  8. This post cannot be displayed because it is in a password protected forum. Enter Password
  9. AA98hoe
    Of course...these amps are extremely underated, and I know people who run them on .5 ohms daily. But as for exact RMS numbers, I couldn't tell you. I know the aq2200 @ .5 ohms was puttin out around 4100watts Is this for real? I dont think thats possible not at 14 volts I clamped my DD m4s (3500w at 1 ohm) at 12k so yea i think its possible. aq is DDs sister company
  10. AA98hoe
    I can think of a few starting with what i think is best. cactus,american bass, DC,(all the same build house),DD, mmatts, soundstream xxx, and dtr series,lanzar, to name a few i run my DDs at .35 daily with no problem
  11. This post cannot be displayed because it is in a password protected forum. Enter Password
  12. AA98hoe

    going to pull my system and tweak the box for autorama

  13. This post cannot be displayed because it is in a password protected forum. Enter Password
  14. AA98hoe
    going with 7/8s allthread they only had up to 2" lol
  15. This post cannot be displayed because it is in a password protected forum. Enter Password
  16. AA98hoe
    i run them too, midbass and vocals are crystal clear. i have another set im going to put in my back doors
  17. This post cannot be displayed because it is in a password protected forum. Enter Password
  18. This post cannot be displayed because it is in a password protected forum. Enter Password
  19. AA98hoe
    lost me on the coupler why not just sraight all thread sir
  20. This post cannot be displayed because it is in a password protected forum. Enter Password
  21. This post cannot be displayed because it is in a password protected forum. Enter Password
  22. AA98hoe
    Almost word fer word in my text response last night Oh i trust you friend just seeing who else out there is smart:) you sure you didnt talk to him and tell him what too post? and by the way im pulling the box so i mite do allthread. or just screw it real good through the top and bottom
  23. AA98hoe
    Its 34deg outside and i dont have a garage to work in so allthread isnt a option plus im too lazy I can get some big allthread too up too 3'
  24. AA98hoe
    four 18s is alot of flex i would of used allthread but i dont want to pull the box its a pain. so i needed something meaty to toe-nail into on the bottom.
  25. AA98hoe
    I noticed my baffle flexes under high output and low freq bass. I bought a 2" circle wooden dowel and was going to put it directly in the middle of my box. question is, thats going to be inline with the middle of my port also. will this cause any disruption in the airflow going in the port? Is the brace worth it? I dont want my numbers to go down, but im curious to see if they go up. any advice will help thanks my box and the dowel
×
×
  • Create New...