superchargedamd

where are you in NY? I am and would love to know the same

Check out www.teamnortheastspl.com Im hitting up a show in cuse on sat

I second even though my sig is not so clean

This... you have no port, just a hole....seriosly dude you need to caculate a port to tune your box, it WILL sound 100 times better. with no port your subs have pretty much no dampning what so ever, as said you just have a big leaky sealed box from the dimensions you have you have a 32 cube box. you port area is way way way to small for you box a port 10x20 and 7" deep will tune you to 30hz and you box will sound a million times better, other than that nice subs and you did a good job on the rest of the box So after a long winter i am back on the system.I have went with 8.5x24x9 deep.Thanks for all the input.Just wondering what kind of lose the sub beating over half the port.I will be making the hole bigger to fit port then brace as ness.Thanks

I have a cadence ultra drive amp I would like to give to a friend but cant find the paperwork.Just kinnda wondering how much it puts out-rm, max ohm load bridged,and peak.Has two 25 amp fuses is a two channel brigeable.There are no markings on amp other than seriel#.This kid is cheaper than i am.Help me help a brother out.thanks

thanks for all the posts.im going to try 6 round ports @ 5 inch long and see how it does.got it meetered and only 147 pretty sad a.seconed skin here we come.but yes what you said is what torrets said so i thought i was doing the right thing.

the box is .75 mdf,the sub displacement is .22each and there are 4 24 inch 2x4s and 6 14 inch 2x3s and the corners are about 3 inch at the widest part @24 long.i tried torrets again but when ever i add lenght the hz go down way low.at work i have cardbord tubes that range from 2.5-6 inchx.25 thick that would work great for a port if i know what to do with it.

power is a power acustick 5500d @ 1 ohm 3200rms,3 700 crank batts,40 farid cap and stock alt.yes i know the port sucks but torrets didnt say anything about depth.and it really seems to look like steves box no?

box is 48x48x24.port is 10x10.only thing i was going to change is put some half round around the port

sorry that cam mic sucks but could anybody give me some advice on my box and port?yes it needs some skin bad. thanks much in advance.