pburke2009

Well actually im sticking with the dc 1.2k so i will probabaly do a 200amp fuse and a 150 or so by the amp should that be fine and do i need another one since im going to have a second battery and if so what size? only runnin one run of 0 gauge from the front battery to the back one

or do i need more?

I was just going to do one run with a 300amp fuse will that work? and thank you guys for all the help.. i was going to run the xs d545 or a kinetik h600.

thats what i was thinking so one small battery plus the one i have up front will do me fine? That makes me happy all dc stuff but how big of a fuse wold i need up front and what other fuses would i need? And would i be doing two runs of 1/0 gauge or would 1 be fine

well i wanted all dc setup for the most part but im thinkin it might be cheaper to just get a kinetik battery and a aq1200 or something that does 1000rms@ 1 ohm... If anyone knows any good amps that will do that let me know... What would i want for a battery and how many fuse what size and where? and how much wire...

So im looking to get a 1.2k here in sept and wanna know everything i need to get so i can run it without much voltage drop... And if it can be under 300 bucks... that would be awesome i already have a volmeter so i will know what my voltage is at i need a upgraded battery in the back and 0 gauge wire and fuses and fuse holders basically everything besides the amp

ok thank you very much.. where would i find those fuses and the 1/0 wire

okay thank you what is a safe fuse size for most batterys will have a kinetik or xs one big battery whatever replaces stock and a small one in the back

Not trying to jack the thread but i have one question how do you set up dual battery setups im looking to switch out my stock one and add one in the rear and wanna know what and how to do it b4 i try to do it myself and it not work

Ya thats what im going to do... lol? What all will i need to run that AQ1200? How much will i need to save b4 i can upgrade amps? Running stock everything right now.... What do you guys think i could hit with that DC 10 on only 300rms? Did 130 on 450rms on a 10 alpine type r so idk?....?....?

Ok thank you im using this for research... so when i have the money i can get more power... How bad is it to run one coil instead of both cuz my amp now is only 2 ohm stable the sub im gettin is dual 2 ohm so either i have to wire it to 4 ohms or get a new amp or wire it to only one coil for max power output from amp which aint even half of half the 1000rms the sub will handle

Cause the amp i have now will only put out 300rms to that sub... which im thinking wont be that loud but will see

So i am getting a DC lvl 3 sub with Lvl 4 coil and soft parts looking for a amp 1 ohm stable that will put out 1000rms at 1 ohm? and what fuse holder and fuse would i need? And would i want to upgrade batteries right away? and would i also want one in the rear...?

oh... Lol I Feel stupid...

Why are you selling it? I made an offer but wont have the money for like 2 days... Has it seen power or any clipping etc?

Yea they are good but they are not beefy enough for me... What sub would go good in a almost 2 cubic ft box that is a ten? No more than like 400 bucks... I was thinking dc but wanted to research a lil more if possible

Ya my box is kinda big too so i dont know if i wanna do that right now i will just stick with the lil system for now and slowly save up for some DC Power

Non Negotiable?

I wish lol just the first thing i put on for some reason thought it was sick..

but FoxRacing that was a older sub though will that make any difference...?

ok i know what im doing but just dont wanna buy something i cant use... How did the sub do with all that power? wat amp did you use and what all did you have runnin it battery wise and such... i dont like havin to clip to compete lol...

plus i hit a 134 so far with this lil setup not on full tilt..

ok it the new one and ya i think i will wait for those bigger numbers until i get my new system

So i have a very basic question how much power can i put to a 10 alpine type r dual 4 ohm... Im now running a little jensen 900 watt power amp only doin hopefully 450rms... what do i got to work with lol just wanna raise those numbers as much as i can