anthonyott99

Whats the diff between the first and second versions ? I only need it to do around 1000 watts

Im not sure ??? http://cgi.ebay.com/...5fAudioQ5fVideo

RD AUDIO 3250.1 CLASS D LINKABLE MONOBLOCK AMPLIFIER Specifications RMS power, 2 ohm linkable/dual mono5600w x 1chRMS power , 0.875 ohm mono3750w x1chRMS power , 1 ohm mono3000w x1chRMS power , 2 ohm mono1500w x1chRMS power , 4 ohm mono750w x1chRMS power Signal to Noise Ratio>100dBLow pass frequency crossover35Hz~300HzSubsonic filter10Hz~60HzBass boost @ 45Hz0~18dBPhase shift control0~180 degreeFrequency response10Hz~350Hz (+/- 1dB)T.H.D @ 4 ohm<0.1%Efficiency @ 4 ohm86%Fuse rating300A(external type fuse - not included)Input Sensitivity200mV to 6V (+/- 5%)Dimensions222(W) x 52(H) x 590(L)mm

Southeast oklahoma has around 8 inches since noon yesterday and its still fallin !! Lets see some more vids of your systems cleanin that snow off people !!!!!!!!

Title says it all, Enjoy !

I have upgraded to a 130 amp alternator and did the Big 3 with 2 gauge. so should be ok until i go to some serious power !

Hell Yeah ! Plastic ? No way, we decided a long time ago that if we couldnt pay for it in cash then we didnt get it ! House, my Taurus, and my Wife's Ford Freestyle are all paid for ! So hopefully after my front stage is finished then i can save up a few paychecks and get some serious subs ! Maybe . . . . . . . Fi BTL , AA , or sundown 12's ?

HECK YEAH ! It may not be much but i stay on a strict 65 dollar a paycheck budget, so considering its kinda impressive i think !!!

Might want to upgrade subs bwfore you upgrade power or you will have no more subs Well i meant just purchasing more power first !!! But yes you are correct !! LOL

Thanks guys, yeah into the trunk like the vid shows near the end. Appreciate the positive comments fella's ! I just decided to start at the bottom and work my way up ! Starting on fiberglassing my doors for some 8" mids now and then will upgrade my sub power and then the subs eventually !

I know this isnt much compared to what ya'll are use to but this is my first video with the new Hifonics subs on 600 watt Powerbass amp . Dang i shot on the side with the paint chipped ! LOL

I really appreciate everyones time they took to input but im just not seeing how these wouldnt work if they are facing the opposite direction in different boxes and not sharing the same space ? Thanx !

I mean , what im trying to say is, if they arent sharing the same space then it shouldnt matter ? Be the same as someone running subs in the trunk and also having subs in the doors that are running separate amps, correct ?

ok , one more question, if i was running my set in the trunk and running the other subs facing forward at the back seat, I.E. the two sets of subs wouldnt be sharing the same space, would that work alright ? shouldnt be any phasing or cancellation issues if they are not sharing a common space , correct ??? Thanx for the input guys !! P.s. The subs that are facing forward at the back seat are also in sealed boxes separated from the trunk where the ported box resides .

cool, i will just see what is the cheapest ! Y splitters or 3' of rca ! Thanx everyone !

ps -i dont want to sell them and get two better subs, i have other plans in the future for this setup, its just that i have these in boxes and ready and was just wanting to go ahead and run all four since i have them

What is the problem with running two different pairs of subs if they are running off of two different amps and in separate boxes ? Thanks for the input !

i know this is not the ideal way to power 4 subs but i just have the two other 12's in boxes and the other 600 watt amp just sitting around so i figure might as well stuff them in the trunk and run all four ! And if i run the Y connectors will i be splitting the output voltage from the HU between the two amps ? I figured if i use the output on the first amp i would be keeping the output voltage from the HU the same to the second amp , correct ?

What is the best way to run two amps ? i have one 600 watt running my two Hifonics hfi12d4's and want to use my other 600 watt to run my old sony 12's and wondering if i should purchase a Y connector for splitting my RCA's coming from my HU sub pre-out or should i run the second amps input off the output of the first amp ?

i am actaully thinking of going the cheapest way out and get a set of the hifonics hfi12d4's and running them with my amp cuz they are DVC and i can wire them down to 2 ohms and get the whole 600 watts !!

so , right now im only getting like 300 watts ? 150 to each speaker ? Correct ? Essentially i would be doubling my power ?

I am assuming for this situation i should get a mono amp and then wire my subs in parallel and then they would be wired to 2 ohms correct ? Most mono amps are 2 ohm stable i believe.

Well i want to use this amp for my front stage so want to purchase another amp with more power for the back, but i still dont quite understand the whole thing with wiring and ohms and all that ? Im not actually so much concerned in brand of amp but what type and wattage and ohm i need and how to wire my subs to it

i was told that with SVC 4 ohm subs im not going to get the whole 600 watts from this amp , im trying to understand but dont quite grasp it, please help ? Im assuming i need a mono amp ?

I really need help picking the right type and wattage amp, I have the following : 2 x Sony 12" Subs - nominal 350 rms- 1200 max rms at 4 ohms. In custom built ported box at 4 cubes tuned to 35hz Current Amp : Powerbass asa 600.2 - 1200 watt max class a/b 2 channel amp 4 ohms - 150w x 2 2 ohms - 300w x 2 4 ohms bridged - 600w x 1 Now my subs hit hard now, and i am pleased but i would like to step up the power and see what they can do. Can ya'll please suggest an amp ? At least a type of amp and wattage please . Also my subs are wired in series now, and im not sure what that makes my wattage and ohms, can someone please tell me what wattage and ohms i have running to them now and what i will have with say a Mono amp ? These are SVC subs so i know im not getting the full 600 to them, correct ? ARGGG ! I get confused with this , please help !!