-
Posts
67 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by BlaneC
-
-
Can you change mine to BlaneC please
-
It's probably about 50/50 on the people who recommend them, monkey see monkey do. Yaddidmean?
And the monkey see monkey do works great for their marketing and even better for "development" of their products
-
Ya man, definitely listen to the people who have never seen a dc sub in person.
-
Seriously? What answer did you expect from this forum... Dc ftw duh. You coulda said lvl 2s and it would still be dc ftw.
Buy a real product. Not a dc sub.
-
7hz tuning ftw
-
You most likely have no where near the room to build a proper 6th order for 4 12s in that car
-
If you have the cash now I would try to get this one. Damn good price so far.
If not keep looking for used. For that price you'll have to get used except for the crescendo.
-
Whats your reasonable price? Better have a big budget for a decent sized amp.
-
I was going to ground to alts I just forgot to put it up there also should I increase the runs to engine block or just increase it to 1/0
the alt negative is the same as the engine ground. arent all of these wires 1/0??
i didnt notice but you need two fuses between the front battery and back bank. one close to each end.
You really only need like 2 runs of negative front to back then one or two grounds in the back to the frame and you would be fine.
i completely disagree.
remember you need negative runs from alt to battery. i like to use an alt mount as a grounding spot.
Why do you disagree?
That is more than enough ground. I know that you need the alt to battery grounds but I was just talking about front to back.
why does it make any sense to have 4 positive runs and two negative runs? even if you do two more to the frame, why settle for the much more resistive steel to carry current to your batteries/amps?
Because negative doesn't carry any current. You are just providing a ground. Why would it matter where it is coming from.
its funny how often people argue with me that dont know what they are talking about.
1st off, DC flows from - to +. second, this is called a circuit. current goes through all the wires. do you think it just disappears?? and if you dont believe me you can go get a clamp meter and measure the + and - wires and see the amperage on each is about the same.
I'm not trying to argue at all man. Amperage may be the same but there is no voltage so the current is not there. I always believe in having good grounds, and I believe what I suggested would be perfectly fine.
-
You really only need like 2 runs of negative front to back then one or two grounds in the back to the frame and you would be fine.
i completely disagree.
remember you need negative runs from alt to battery. i like to use an alt mount as a grounding spot.
Why do you disagree?
That is more than enough ground. I know that you need the alt to battery grounds but I was just talking about front to back.
why does it make any sense to have 4 positive runs and two negative runs? even if you do two more to the frame, why settle for the much more resistive steel to carry current to your batteries/amps?
Because negative doesn't carry any current. You are just providing a ground. Why would it matter where it is coming from.
-
You really only need like 2 runs of negative front to back then one or two grounds in the back to the frame and you would be fine.
i completely disagree.
remember you need negative runs from alt to battery. i like to use an alt mount as a grounding spot.
Why do you disagree?
That is more than enough ground. I know that you need the alt to battery grounds but I was just talking about front to back.
-
It doesn't matter where you put it its just a ground.
Check these out- http://www.caraudioclassifieds.org/forum/tool-maker/46437-show-off-your-toolmaker-goodies-here.html
-
Yeah connect frame to buss bar
-
For bussbars go on caraudioclassifieds.org and look for tool maker
-
You really only need like 2 runs of negative front to back then one or two grounds in the back to the frame and you would be fine.
-
What impedance are your subs?
-
Single 6" for 2-sa 12's is perfect
-
-
After shipping from him to me its only like 10 bucks less than a new one, and he's been busy lately and I need it quickly.
-
Need a sa-8 dual 2
Or just a sa-8 motor
shipped to 93277 and need it in my hands by next sunday
-
go on caco theres a guy selling 4 of them
-
Are these motors and baskets?
-
Every body asks the same questions, then 10 people give them the same answer 10 posts in a frikin row
-
You don't need 2 fuses from the batt to the amp, one is more than enough
WTB dual alt bracket,
in Want To Buy
Posted
Most of the smaller ford engines cant run dual alts. You'll most likely have to ditch your ac or power steering.