TBSS07

ok cool i will definitley be looking for that servo and rear end, gears might have to wait becuase of my budget but thanks for all the help and is there anything i can do with the stock throttle body to improve performance

How much of a difference did the spacer and cold air intake make when you installed it? Any noticable changes? the thing that was most noticeable was the throttle responce also like above are good upgrades as wellalso have you checked out the http://www.fullsizec...on/performance/ thanks for the site reference will definitley check it out

Now when you say swap out gears are you referring to swapping the tranny or changing up the gears currently in it and i've been contemplating on whether to get 3.73 or 4.10 but not really sure which would be better as far as quicker take offs are concerned.

How much of a difference did the spacer and cold air intake make when you installed it? Any noticable changes?

Looking to gain some power from my old 350 seeing as it is basically stock except for the plug wires. Also this is not a vortec.

thanks everyone for the help we sanded it down and it is fine now

I'll sand down the painted surfaces on or around the bolt to see if it works. If that doesnt work then ill move it.

My Friend says that it is grounded to a bolt connected to the rear seat Move it. That's not really a good spot. Did they sand all the paint off the metal? No there is still paint there

My Friend says that it is grounded to a bolt connected to the rear seat so any suggestions?

I was thinking the same thing but im not 100%

yes it does change as the engine revs so it is the alternator then?

Ok so i have been helping a friend put in his system in his 98 silverado and i have everything ran correctly (rca's away from power and ground cables etc..) and there is still this buzzing or humming noise through the speakers it doesnt affect the music because when you turn up the volume it isnt noticable but when there is nothing playing you can hear it. He is running 4 alpine type r components and the amp powering them a is a quart 4x125. I was thinking it could be a ground loop but im not positive.