Big_Mike

Well I tried making a box and every way the port was about 8-10" short of port area. This is one of the boxes I made.. These are the dimensions. I tried to keep the height and width and depth the same on the outside of the box. This is going to be for a BTL 15 N2 running around 2000-2200wrms daily. Help anyone? Thanks :)

Feel free to send me some designs or other ideas 4.5-5.0 Cubic box height can't be over 18.5". I have 40" of width to work with and at least 22" of depth. I was thinking about maybe the width being 32? I don't know..

Lol. Your port area is the length times the with of your port (I.E. (16x1.75=28)) So with a 7 cubic foot box your going to want at least 84 inches of port area, and that would be 12 inches per cubic foot (minimum). So I wouldn't go any smaller then 16x5.5in, which is 88in of port area... Ahhh gotcha now. Thanks

Lol I'm not planning on putting in a 7 cube box. I just realized that's what it was.. I was aiming more towards 4.5-5

Need a LOT more port area per cubic foot. You should be aiming at 12-16 sq in per cube. Also make sure you take into account how many "common walls" your port will have i.e. walls shared by the exterior of the enclosure & the port. If you are doing one at the bottom of the box facing back, one common port wall. Not a whole big problem, but it helps. If I were you, I'd go with something like a 12w x 8h port or something along those lines. Just make sure there's enough clearance between the port wall & the sub. I honestly have no clue what I am doing on here. Lol just putting in numbers....

Or I can change the width in the port to 2" and have the hz of the box at 34.

Something like that?

I'll check around

Well I listen to mostly decaf and some regular music too. I want it to sound good on music but also put a decent score in spl lanes even though I won't be competing in contests.

This will be for daily

I'm going to be ordering a 15" BTL N2 within the next week or so and I'm trying to figure out which way is the better way to go with a box. I was looking at some prefab but none really caught my eye. It's going in a 04 Tahoe, Not trying to use the whole trunk. Possibly 40Wx18Hx22D as the Dimensions. Anyone give me some ideas? Thanks EDIT: Going to be running 2000-2200wrms.

NO just read the specs Internal Volume: 2.73 cubic feet (Net cubic feet less port displacement), 4.01 cubic feet total thats 2.73 after port displacement and add sub displacement and i would say your lookin at maybe 2.4 to 2.5 cubic feet available for your sub. unless your gonna run 6000 watts to it lol Lol shit.. I'm running about 2100-2200wrms to it. I was looking at the other boxes on that site and they're all tuned from 40's and up..

I was looking at getting this box for my BTL 15 http://www.shipsound.com/Audio-Enhancers-DA115-15-Slot-Ported-Sub-Box--273-cf_p_7952.html EDIT: Total cubic feet 4.0

Lol I was just thinking about it because I saw it on someone else's sub. I wasn't going to do it.

Yeah I was just wondering about that before I buy it. Lol

Could you run 4 guage to the terminals on the sub or speaker wire?

I got my new HID's a week or 2 ago and I've been realizing that my driver side headlight is brighter than my passenger headlight. I looked at them during the day and it turns out my driver side headlamp is brand new and my passenger side one is the original. So I was thinking of using Meguiars One Step Headlight Restoration Kit. It comes with Plast-X Polish and a pad for your screw gun. Has anyone used this and does anyone else have any other suggestions on what I should use or try?

I can't find any place that sells recones for my Orion hcca 15.2. Sonicelectronix never gets em in stock. Does anyone know where to get em?

You probably don't have any sound drivers installed.

Lol good to know.

Lol ok. Yeah I was looking around and this seemed like the right amp for the right price.

I'm thinking about buying a AQ2200D. I'm going to be running this amp with an Fi Btl 15". Do you guys think this will be good enough. I will be running 1 battery and a big 3 upgrade. Also will be running all 0 gauge wires. What other amps do you guys recommend that I should look at to run instead of this one?

I slowed it down and tuned it to 32hertz. Kickin' Letme know what you think

I'm just going to slow it down and boost it to 32hertz

Hahah alright