Jump to content

OrzechNJ

Members
 View Profile  See their activity

  • Posts

    7891

  • Joined

  • Last visited

  • Days Won

    120

 Content Type 

Posts posted by OrzechNJ

  1. Red and green light on right away

    in XS Power Batteries / Chargers! (and other stuff too)

    Posted

    Trouble shooting

    If the charger is not functioning correctly turn the power switch off and disconnect it from the battery. Wait until all LEDs and the display have gone completely out and

    then reconnect and turn the charger back on. This will fully reset the unit.

    If the charger will not power up and all lights and displays are off, check the fuse.

    If the LED flashes yellow and orange repeatedly, the battery is already fully charged and the charger should be disconnected.

    For all other issues contact XS Power at: Telephone: 865.688.5953, E-mail: [email protected]

    Just called, i have to send them the charger

    Thanks

  11. 5 cuft for 2 Fi Q 12's

    in Subwoofers / Enclosures

    Posted

    ok I will go for it .. thanks a lot for help !!!

    the only problem which I have is that I dont really have a good place to make all cuts etc so I will just go to home depot and they will cut it for me ..

    I might have some problems with cutting the port in the front pieces and the circles but I will go for it anyways ...

    any advises or anythin I should be careful about ?

  13. 5 cuft for 2 Fi Q 12's

    in Subwoofers / Enclosures

    Posted

    If your max dims are 16 x 34 x 23 then about 4 cubes is you can have. (would need to declare the subs displacement of 0.32 cubes).

    torres says 5.86 - 2x 0.16disp so i got around 5.5cuft

    You are looking at the gross volume, look below to find the net volume, that is the one that specs the box it reads above 4 cubes but when you enter the driver displacement you will get about 4 cubes.

    oh yea.. I see now..

    I will stick to this than !

    and I still gotta think off how to cut all the stuff since torres doesnt include the port pieces with my port size..

  19. 5 cuft for 2 Fi Q 12's

    in Subwoofers / Enclosures

    Posted

    Ur dimensions are very similar to my current enclosure which i got with my p2s.. And im sure they will do much better in bigger enclosure cause they sound much lower with the trunk open..I was thinkin to make it at least 5cuft or more since they recommend 3.5 cuft for single fi q 12...

  24. 5 cuft for 2 Fi Q 12's

    in Subwoofers / Enclosures

    Posted · Edited by OrzechNewJersey

    hey guys'

    This weekend Im gonna build enclosure for 2 fi q 12's

    dimensions

    34x16x20 a lil bit over 5 cuft without displacement

    I wanna tune it to 30hz with round port and I just wander where I can get one?

    torress says that I need one port 12" long with 6" diameter. port has 0.21 cuft

    thanks !

    edit: Maybe I should go with bigger / smaller port ?

×
×
  • Create New...