skaraudio
-
Posts
1890 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by skaraudio
-
-
-
do you guys have b stock v1 vvx 10s left?
We have new ones for $120 each shipped, like 7 of each left
-
The new line Look Sweet , Cant wait to get one of the 1400.1s , just look at the blue light
After putting these in the Escalade, all 6 amplifiers light up the rear at night really nicely =)
-
Recone price? On the 10" d2
We actually don't sell recones for these at the moment - although in about 4 months we will have soft parts for them. If you need one replaced please just give us a ring at 813-304-2608
-
The brand new T-Series Series amplifiers are a brand new product line from Skar Audio, and with that being said we wanted to get some clamp testing done to go alongside our SMD AD-1 Amp Dyno results with these amplifiers, so you have a variety of tests to see their power output capabilities...Testing conditions/setup was identical on both amps, allowing for an easy comparison between the line. We are very happy with the results, and this will give you a baseline reference point when browsing and choosing from the compact amplifiers on the market.Only the Monoblock Amps in the T-Series line have been tested so far, which is the reason for the exclusion of the 2 new 5-Channel models. We will test and post those results shortly!Head Unit Volume : 60/62Head Unit Sub Level : 6/6Test Frequency : 50 HzTest Load : (1) ZVX-12 D2 resting @ 0.8 OhmTest Electrical : (4) Non-Charging Shuriken SK-BT75 12v BatteriesAmp Gain Set Level : 1/2-------------------------------------------------Skar Audio T-1400.1DPOWER OUTPUT : 1325 Watts (calculated)AMP CURRENT : 27.6 A (measured)AMP VOLTAGE : 48.0 V (measured)ACTUAL IMPEDANCE : 1.74 ohms (calculated)SUPPLY VOLTAGE : 12.86 V------------------------------------------------Skar Audio T-2000.1DPOWER OUTPUT : 2365 Watts (calculated)AMP CURRENT : 37.6 A (measured)AMP VOLTAGE : 62.9 V (measured)ACTUAL IMPEDANCE : 1.67 ohms (calculated)SUPPLY VOLTAGE : 12.48 V
-
We are looking at an ETA of late December on these for arrival =)
-
Sounds like your bass knob is going out. Might trying unplugging it and try manually turning up to see if the helps.
Roger that, will try and report back.
Let me know if that helps, if not please take each sub out and DMM the coils - let's make sure they are good and reading properly. Please email [email protected] and I will be more than happy to resolve this with you directly =)
-
The brand new MSK Series amplifiers are now in stock and a new product line from Skar Audio, so what we did today was go ahead and throw them on the test bench here in our office to test power via clamp testing...Testing conditions/setup was identical on both amps, allowing for an easy comparison between the line. We are very happy with the results, and this will give you a baseline reference point when browsing and choosing from the compact amplifiers on the market.We will also be posting the results from our SMD AD-1 Amp Dyno testing in this thread as well, so you can see a side by side comparison of the results from each method used...Head Unit Volume : 60/62Head Unit Sub Level : 6/6Test Frequency : 50 HzTest Load : (1) ZVX-12 D2 resting @ 0.8 OhmTest Electrical : (4) Non-Charging Shuriken SK-BT75 12v BatteriesAmp Gain Set Level : 1/2-------------------------------------------------MSK-200.1DPOWER OUTPUT : 256 Watts (calculated)AMP CURRENT : 11.9 A (measured)AMP VOLTAGE : 21.5 V (measured)ACTUAL IMPEDANCE : 1.81 ohms (calculated)SUPPLY VOLTAGE : 13.17 V------------------------------------------------MSK-500.1DPOWER OUTPUT : 645 Watts (calculated)AMP CURRENT : 19.3 A (measured)AMP VOLTAGE : 33.4 V (measured)ACTUAL IMPEDANCE : 1.73 ohms (calculated)SUPPLY VOLTAGE : 12.88 V
-
We are happy to say that our MSK Series of Amplifiers are officially in stock and ready for shipping! These little powerhouses are impressive and are the baby brothers to our already existent SK Series! The Mini-SK(MSK) Series consists of 2 monoblock amplifiers: MSK200.1D and MSK500.1D.The pricing for the amplifiers is as follows:MSK-200.1D - $189.99RMS Power @ 1 Ohms : 218 Watts x 1 CHRMS Power @ 2 Ohms : 150 Watts x 1 CHRMS Power @ 4 Ohm : 87 Watts x 1 CHFrequency Response : 15Hz ~ 250HzInput Sensitivity : 6v~0.2vLow Pass Filter : 35Hz ~ 250HzRemote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection8 Gauge Power and Ground Terminals4 Way Protection CircuitryDimensions : 125mm Wide x 56mm High x 160mm LongMSK-500.1D - $219.99RMS Power @ 1 Ohms : 541 Watts x 1 CHRMS Power @ 2 Ohms : 402 Watts x 1 CHRMS Power @ 4 Ohm : 246 Watts x 1 CHFrequency Response : 15Hz ~ 250HzInput Sensitivity : 6v~0.2vLow Pass Filter : 35Hz ~ 250HzRemote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection8 Gauge Power and Ground Terminals4 Way Protection CircuitryDimensions : 125mm Wide x 56mm High x 200mm Long
-
Yes! We are happy to say that all our T-Series amplifiers are OFFICIALLY fully stocked and ready for shipping! The T-Series consists of 2 monoblock amplifiers and 2 5-Channel amplifiers and are all very impressive! The 4 new models in this series are all very well built, high performance, and conservatively rated amplifiers. They also feature several nice design features, such as Tiffany RCA connectors, blue LED Lighting, and a very efficient heat sink for maximum heat dissipation.Pricing is as follows for these fantastic amplifiers:T-60.4-200.1AB - $329.99RMS Power @ 1 Ohms : N/aRMS Power @ 2 Ohms : 80 Watts x 4 CH + 350 Watts x 1 CHRMS Power @ 4 Ohm : 60 Watts x 4 CH + 200 Watts x 1 CHFrequency Response (-3dB) : 10Hz~40kHzInput Sensitivity : 6V~0.2VLow Pass Filter : 50Hz~500HzHigh Pass Filter : 80Hz~4kHzSubsonic Filter : 15Hz~50HzBass Boost (Variable) : 0dB~12dBSignal to Noise Ratior : 100dBDamping Factor : ~180Fuse Rating : 30 Amp x 3Remote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection4 Way Protection CircuitryDimensions : 250mm x 53mm x 420mmT-60.4-500.1D - $399.99RMS Power @ 1 Ohms : N.A. (4CH) + 500 Watts x 1 CHRMS Power @ 2 Ohms : 80 Watts x 4 CH + 350 Watts x 1 CHRMS Power @ 4 Ohm : 60 Watts x 4 CH + 200 Watts x 1 CHFrequency Response (-3dB) : 10Hz~40kHz (4CH) 10Hz~250Hz (5CH)Input Sensitivity : 6V~0.2VLow Pass Filter : 50Hz~500HzHigh Pass Filter : 80Hz~4kHzSubsonic Filter : 15Hz~50HzBass Boost (Variable) : 0dB~12dBSignal to Noise Ratior : 100dBDamping Factor : ~180Fuse Rating : 30 Amp x 3Remote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection4 Way Protection Circuitry5th Channel is 1 Ohm Stable (4 CH is 2 Ohm Stable)Dimensions : 250mm x 53mm x 400mmT-1400.1D - $329.99RMS Power @ 1 Ohms : 1400 Watts x 1 CHRMS Power @ 2 Ohms : 700 Watts x 1 CHRMS Power @ 4 Ohm : 350 Watts x 1 CHFrequency Response : 10Hz ~ 250HzInput Sensitivity : 6v~0.2vLow Pass Filter : 50Hz ~ 250HzRemote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection8 Gauge Power and Ground Terminals4 Way Protection CircuitryDimensions : 250mm Wide x 53mm High x 340mm LongT-2000.1D - $549.99RMS Power @ 1 Ohms : 2000 Watts x 1 CHRMS Power @ 2 Ohms : 1000 watts x 1 CHRMS Power @ 4 Ohm : 500 Watts x 1 CHFrequency Response (-3dB) : 10Hz~250HzInput Sensitivity : 6V~0.2VLow Pass Filter : 50Hz~250HzBass Boost (Variable) : 0dB~12dBSignal to Noise Ratior : 100dBDamping Factor : ~180Fuse Rating : 200 Amp (External)Remote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection4 Way Protection CircuitryDimensions : 480mm x 53mm x 340mm
-
I will also be doing this amplifier on our 12v Bank (6 SK-BT75s) within the next few days. I do not have a 14v bank in the test bench area yet but one day when that is complete we will get those results as well =)
The Dyno is set up for the SK-2500.1D Testing Today, and the video of the SK-4500.1D testing should be finished uploading to YouTube shortly.
Best Regards,
Kevin
-
You also know, that the .5 load test, is reactive right? .Not nominal....Damn how did I miss that 15.42 Volts
Would you wire to like .2 ?
I thought it was nominal not reactive. Like nominal would mean that it is always .5 and a reactive load would change.
Could be wrong though.
No, the Dyno tests using purely resistive loads. It is NOT subject to any type of rise. If a test is done at 1 ohm, then that is what the amp is seeing for the entire duration of that test.
Now that being said, the dynamic test is much easier on the amp and electrical than the certified or uncertified tests. I would be very surprised if that amp stayed on for a .5ohm certified test.
And for the fact that he simply states they will not warranty the amp at .5 ohm. I don't get why a company would test at .5 ohm load and then not warranty if they are going to brag about results? Still great numbers and loved my 4500s.
We did the test because customers requested it, and just because we cannot warranty them at that load does not mean a lot of our competitors don't run it at that load without issues =) They are on an uncharged bank of (16v) batteries (4 Batteries), so of course the dynamic runs are short and not as much of a drain on the batteries as the cert and uncert tests, but nonetheless it gets the point across that this is a very strong amplifier. The Certified and Uncertified Tests are the most accurate tests to go by if you are looking for real power at 1 ohm.
-
3
-
-
Today at Skar Audio we put the Skar Audio SK-4500.1D on our newly built test bench and got it all set up with the SMD AD-1 Amplifier Dyno for power testing results...Needless to say many customers asked us to Dyno this amplifier once we started putting videos up of our smaller amps, and now that we are set up to do so, the time has finally come to post those results. Steve and Tony did a great job with designing and building a product like the AD-1 so that way we can easily test and get across the real power output capabilities of these amplifiers in the most accurate way possible.Enjoy!SMD AD-1 Amplifier Dyno Testing ResultsModel: Skar Audio SK-4500.1D Monoblock AmplifierCertified Run at 1 Ohm : 4,943 Watts at 13.85 VUn-Certified Run at 1 Ohm : 4,996 Watts at 13.85VDynamic Power Run at 1 Ohm : 6,208 Watts at 14.88 VDynamic Power Run at 0.5 Ohm : 8,641 Watts at 15.42 VThank you for taking the time to read this thread on our SK-4500.1D, for more information about this product or to find an authorized dealer from which to buy, please visit our website at www.SkarAudio.com-Kevin
-
4
-
-
Nice video - thanks for sharing :-)
-
I see you tested it at 0.5 ohm. Is it half ohm stable for daily use with proper electrical and how will that effect the warranty?
We have quite a lot of customers run the SK Series at 0.5 ohm but they understand that it is not something we warranty. Our warranty is void when running below 1 Ohm, we simply did it in this video to show how brutal the capabilities of this amplifier are. If dialed in properly you should not have issues running them at 0.5 Ohm, it is just something we are not able to warranty.
-
Thank you for sharing, have been so busy haven't gotten around to it =). Will be getting the rest of the SK Series dyno'd this week and post up a thread compiling all of the amplifiers and results/videos for each.
No problem, some of us here would like to ask some questions about the video just to clear up some facts. So please let us know what you are powering the amp and dyno with. I know everyone has that question on their mind.
We have a small battery bank on the right of that tool bench consisting of (4) Shuriken batteries which in this video are not on a charge.
-
On Friday we threw the Skar Audio SK-1500.1D on the test bench and Amp Dyno'd it using all 3 modes available on the SMD AD-1.Very happy with the results, which are below with the video. It's a great machine that we feel fortunate to have for the most accurate testing possible on rating these amplifiers..If anyone is interested in finding out some more information on our amplifiers please feel free to browse our website www.SkarAudio.com-KevinAmplifier : Skar Audio SK-1500.1D Monoblock AmplifierAmp Dyno ResultsCertified Run : 1,523 Watts @ 1 Ohm (14.38v)Uncertified Run : 1,652 Watts @ 1 Ohm (14.06v)Dynamic Run #1 (Burst Power) : 1,898 Watts @ 1 Ohm (15.03v)Dynamic Run #2 (Burst Power) : 2,567 Watts @ 0.5 Ohm (14.53v)
-
Thank you for sharing, have been so busy haven't gotten around to it =). Will be getting the rest of the SK Series dyno'd this week and post up a thread compiling all of the amplifiers and results/videos for each.
-
Thanks guys - still looking at 100% delivery either Thursday or Friday of this upcoming week! Pre-order before it is to late!
-
Keep them coming, great pics so far :-)!
-
T-1400.1D Technical SpecificationsRMS Power @ 1 Ohms : 1400 Watts x 1 CHRMS Power @ 2 Ohms : 700 watts x 1 CHRMS Power @ 4 Ohm : 350 Watts x 1 CHFrequency Response (-3dB) : 10Hz~250HzInput Sensitivity : 6V~0.2VLow Pass Filter : 50Hz~250HzBass Boost (Variable) : 0dB~12dBSignal to Noise Ratior : 100dBDamping Factor : ~180Fuse Rating : 40 Amp x 3Remote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection4 Way Protection CircuitryDimensions : 250mm x 53mm x 340mmAt what voltage are these rms ratings at?
14.4v
-
no need?....
I should clarify - it is not a function for user control on this amplifier - but there is a subsonic filter built in.
-
We are happy to announce that the "T-Series" amplifiers are only about 8 days from arriving to our facility to start shipping out. They will be fully in stock in 8 days as stated, and for a limited time only (Today through Thurs Oct 17th) you can PRE-ORDER them at a super special price that will never be available after this week.The T-Series was founded on the principal of us wanting to design a 5 channel amplifier independent of our other lines and offer it at a reasonable price. With that being said, there are two new 5 channel amplifiers in this series as well as two monoblocks. The 4 new models in this series are all very well built, high performance, and conservatively rated amplifiers. They also feature several nice design features, such as Tiffany RCA connectors, blue LED Lighting, and a very efficient heat sink for maximum heat dissipation.PRE-ORDER InformationIn Stock : October 18thEnd of Pre-Order : October 17thT Series Amplifiers by Skar AudioT-1400.1D MonoblockT-2000.1D MonoblockT-60.4-200.1AB 5 ChannelT-60.4AB-500.1D 5 ChannelFree Shipping on ALL Pre-Orders in the USA - DON"T MISS OUT ON THIS 1 WEEK SPECIAL PRICING!T-1400.1D Pre-Order Price = $260.00 (Normal MAP = $330.00)T-2000.1D Pre-Order Price = $450.00 (Normal MAP = $550.00)T-60.4-200.1AB Pre-Order Price = $260.00 (Normal MAP = $330.00)T-60.4AB-500.1D Pre-Order Price = $330.00 (Normal MAP = $400.00)To Order :Please either visit our website and the specific product age of each amplifier to pre-order - or paypal the correct payment amount to [email protected] and leave a note. All Pre-Orders will ship the same day the new models arrive, which is Friday Oct 18th. The Pre-Order will end the very next day and pricing will go up to normal full MAP.T-1400.1D Technical SpecificationsRMS Power @ 1 Ohms : 1400 Watts x 1 CHRMS Power @ 2 Ohms : 700 watts x 1 CHRMS Power @ 4 Ohm : 350 Watts x 1 CHFrequency Response (-3dB) : 10Hz~250HzInput Sensitivity : 6V~0.2VLow Pass Filter : 50Hz~250HzBass Boost (Variable) : 0dB~12dBSignal to Noise Ratior : 100dBDamping Factor : ~180Fuse Rating : 40 Amp x 3Remote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection4 Way Protection CircuitryDimensions : 250mm x 53mm x 340mmT-2000.1D Technical SpecificationsRMS Power @ 1 Ohms : 2000 Watts x 1 CHRMS Power @ 2 Ohms : 1000 watts x 1 CHRMS Power @ 4 Ohm : 500 Watts x 1 CHFrequency Response (-3dB) : 10Hz~250HzInput Sensitivity : 6V~0.2VLow Pass Filter : 50Hz~250HzBass Boost (Variable) : 0dB~12dBSignal to Noise Ratior : 100dBDamping Factor : ~180Fuse Rating : 200 Amp (External)Remote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection4 Way Protection CircuitryDimensions : 480mm x 53mm x 340mmT-60.4-200.AB Technical SpecificationsRMS Power @ 1 Ohms : N/aRMS Power @ 2 Ohms : 80 Watts x 4 CH + 350 Watts x 1 CHRMS Power @ 4 Ohm : 60 Watts x 4 CH + 200 Watts x 1 CHFrequency Response (-3dB) : 10Hz~40kHzInput Sensitivity : 6V~0.2VLow Pass Filter : 50Hz~500HzHigh Pass Filter : 80Hz~4kHzSubsonic Filter : 15Hz~50HzBass Boost (Variable) : 0dB~12dBSignal to Noise Ratior : 100dBDamping Factor : ~180Fuse Rating : 30 Amp x 3Remote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection4 Way Protection CircuitryDimensions : 250mm x 53mm x 420mmT-60.4AB-500.1D Technical SpecificationsRMS Power @ 1 Ohms : N.A. (4CH) + 500 Watts x 1 CHRMS Power @ 2 Ohms : 80 Watts x 4 CH + 350 Watts x 1 CHRMS Power @ 4 Ohm : 60 Watts x 4 CH + 200 Watts x 1 CHFrequency Response (-3dB) : 10Hz~40kHz (4CH) 10Hz~250Hz (5CH)Input Sensitivity : 6V~0.2VLow Pass Filter : 50Hz~500HzHigh Pass Filter : 80Hz~4kHzSubsonic Filter : 15Hz~50HzBass Boost (Variable) : 0dB~12dBSignal to Noise Ratior : 100dBDamping Factor : ~180Fuse Rating : 30 Amp x 3Remote Gain Control Included with KnobLine-In RCA ConnectionLine-Out RCA Connection4 Way Protection Circuitry5th Channel is 1 Ohm Stable (4 CH is 2 Ohm Stable)Dimensions : 250mm x 53mm x 400mmPictures
-
what,no SS filter.
No need on these...
.gif){kind=small}
Skar Audio VD Seres In Stock - 500 Watt RMS Shallow Subwoofer Line
in SKAR AUDIO - (READ ONLY ARCHIVE)
Posted
Only our MA-8" Woofers