peacedisturbance

il just wean my body in to the loud music again lol

yeah i was thinking maybe they just say that so kids wont blast music as a scare tactic or something

so i was in the hospital a couple weeks ago because my lung collapsed and i was reading online that loud music could cause it to happen so i asked the doctor if that is true and he said yes. now i either have to sell my subs or will reconing them down to 12s make them not hit as hard so it could be tolerable so i guess my question is will 2 12 btls hit less hard that my 2 18s and if so if anyone knows the recommended box size for 2 btl 12s

go get your self a shackle lift from autozone lol thats what i did

oh i know lol if it was ok i would of welded it allready

will a limited slip diff work in a 9 inch casing probibly a stupid question but just wondering

THANK YOU lol its a 9 i can allready tell

il look for a vin then while im under there im sure i can find a web sight that will give me the code to tell me what kind of diff i have

so i want to buy myself a limited slip diff for my mustang to get rid of my open diff any one know how to identify what diff you have like a 9 inch or an 8.8 inch rear diff any help would be nice sorry i couldnt find the right place to ask this

does anyone know of any spl event near chicago IL

but the thing is, that some times it works it powers on and plays until i crank it then it turns off and then i have to keep turning off the radio and turning it back on to get the amp to turn back on

im getting the readings from the amp and the remote and no i dont get the voltage drop at the amp when the amp is unhooked when the amp is off i get a perfect 14v

i allredy checked my run of 0 gauge and there are no tears i think im just going to contact audioque and ask to send it in for repair

very strange, if your getting voltage drops that means your electrical must be bad.. alternator / wiring or something.. the thing is though i have all 0 guauge and a high output alt

so ive had my amp for a while now and ive been getting this weird problem with it, so what happens is when the amp turns on the green light on the amp dims and will slowley go out then turn off but the weird part is that its getting 14.4v then when the amp turns on it drops to 8 volts, and whats weird is that sometimes the amp does work and it gets the 14.4v but then all of a sudden it gets 8 volts the ground is prefectley fine. has this happened to anyone else its an audioque 2200

oh i know i would totaly rather take a 93 mustang but i know how good my uncle takes care of his cars so thats why im more interested in his monte carlo

so my uncle might be selling me his 04 motecarlo ss supercharged it has the 3800 and i was wondering if there is an aftermarket supercharger for it to get rid of the stock one and put one on thats gonna give the car more output

thanks for the tip lol

box build for 2 btl 18s just thought i would post them, first time posting images to a forum so im not sure if they are gonna work sorry if the images didnt work here are the links if they didnt work http://s411.photobucket.com/albums/pp200/hellothere987_bucket/?action=view&current=IMAG0164.jpg http://s411.photobucket.com/albums/pp200/hellothere987_bucket/?action=view&current=IMAG0160.jpg http://s411.photobucket.com/albums/pp200/hellothere987_bucket/?action=view&current=IMAG0165.jpg http://s411.photobucket.com/albums/pp200/hellothere987_bucket/?action=view&current=IMAG0166.jpg 10.25 cubic feet of box and 180 square inches of port tuned to 35 Hz

my friend says that a 1986 BMW 325e would be cheaper than owning an american car idk why he thinks thats right please tell him that any german car is going to be more exensive to repair than any american car

yeah i know i alredy got this like fiberglass kit from menards and some wooden dowel rods i just need to buy like 2-3 sheets of mdf

they are dual 2 ohm going to be wired 1 ohm each amp

ok so no single chamber lol

ok well here is the total space i have 41 1/2 W 34 D 18 H its for 2 btl 18s running off of 2 aq 2200 so the box has to have separate chambers each for each sub and tuning 35-40 Hz using 3/4 inch mdf because that the largets thickness of mdf i can find around me so if someone could be a real pal and design a box for me that would be awesome

does any one know a good company that designs boxes for cheap because all i know is dave the box guy which i e mailed and got no respose and its been over 3 weeks and i know about the enclosure desighn thing from sound salution