BassMonsterZ

Great so if you can move a z-v.3 I think with my sub i'd get no problem. (I have to move a Fi BL 15") (and i found you also on youtube LOL) thanks for your replies.

Hi guys. Someone has tried this new amplifier? it will push out 1500 watt rms at 1.4ohm? I also read this amp is able to make 2000 watt , is it true? and it will push those watt with a voltage of 12,5?

Ok. Thanks

I want to buy a FAM 120AH (it's an Italian battery) about this battery all people here talk good about this product.(his price is 255 euros) this model (120AH) has 1800A I can't get an XS because in my country there is no importers.

Ok, nice Oh, and i miss to ask, if i can run this amplifier on just one battery of 120AH or a 100AH (the battery is a FAM) with the default alternator of the car.

Hey guys, i want to change my amplifier because the massive audio p1500 is really crap as watt. So i want to buy a Sundown 2500D for my Fi BL 15" to run at 1.4ohm. i listen to hip hop\rap music(lil jon,e-40,young jeezy and etc..,and sometimes dubstep\chillstep, so what i need is low and quality loud bass I hear really good opinions about this amp. Do you recommend it? it's really a good amp? and it put out real power? i also read that the new sundown 2500d do 2700watt at 1.4ohm.

Thanks for your answers This is just a prototype, i don't own a car (to place the box in my car i want to remove the rear-seats) yet. (i will get the car this september, i already got all the components, i just need the car now ) With this box i'm just starting to make me an idea of what the box can be. Can i have a your contact like msn or skype , or just an e-mail? so when i get the car i'll contact you for a good box project... (if you do not mind)

My thought is 0.9" of thickness for the box walls and 0.7" for the port wall. And i think the external dimensions are approximated to this: Box width: 24,8" Box Height: 20,8" Box length: 17,8"

nobody known if the port is too big?

Hi all, i just need some advice about the air port for my Fi Bl 15" box. the box is about 4.4 cu.ft tuned to 33hz and the sub will be moved by a massive audio p1500.1 Here is a picture of my project: The measure in the picture are in meters so you have just to change this: Green line is about 3.9 inches (air port width) Red line is about 28.7 inches (air port lenght) Yellow line is about 16.5 inches (Air port height) The thickness of the air port is about 0.7 inches What do you think? the port is too big or it can be good? With this port i will be able to make some hair tricks and get loud low bass? and can you tell me also if a thickness of 0.9 inches is good for the box walls?

Hi, I already have a build but it's not a car build but a "car-home build" (i have car audio components in my room, powered by a 12v battery) But finally in August i reach the age to take the driving license. Unfortunately where i live a FI BL 15" cost as an Fi BTL N2 18" Anyway here are my intention for my first build in my first car: Subwoofer: FI BL 15" (2012 series) D2 wired to 1 ohm Subwoofer amplifier: Massive Audio P1500.1 Woofers: Massive Audio SK5 Woofers amplifier: Massive Audio P200.2 Stereo: JVC-KDR611 Here are the steps that i want to follow: September: Get the car Take the measure from the car trunk for the subwoofer box Take the car to an installer to edit the doors with the new speakers and link some wires. Make the subwoofer Box. (I already have done a prototype for the box it will be tuned to 32-33hz and about 4.2cu.ft) Make a removable system for the subwoofer box (Because my garage is busy by dad car sometimes and i want to avoid thieft...) Get the new battery Install amplifiers Play the system I also done a quick video of my sub, nothing of special, just a sort of unboxing:

Hi, I'm starting to creating the box project. Box will be of 6.7 cubic feet, but i don't known how much must be the dimensions of the air port. What can you advice? i want to get the sub accorded really low frequency.

I also done the animation but i can't render it because my CPU overload after 5/10 frames and maybe i will make also the SMD 18"

Hi, today i done a model of the FI BTL 18" with 3D Studio Max: i had post here because there is no a general graphic forum.. i will post some other 3d model pic's in next time..

LOL, after about 3 months finally the box for speakers are done.Now i must do another 2 hands of paint and i can wire all.This is a preview : I can say, those big baby's scare me when i'm in "face to face" with them.