drunken monster
-
Posts
24 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by drunken monster
-
-
I have a digital multi meter, what should I do? It won't be til tomorrow though, gets dark in England early.
-
The first wiring diagram is how it is wired now. Now how should the RCA's be?
-
I have been using google all day, lol. They are SVC 4 ohm.
The amp is a Pioneer GMX-334.
The subs are Pioneer W1201's.
Thanks for the help.
i just had to try that picture out hahah. you should sell that amp and buy a monoblock i have no experience with 4 channels sorry
The amp is just temporary it came with the subs and that's what the guy was using to power them. If I can get the subs to sound good, I will be purchasing the correct amp for this setup and use the 4 channel for the door speakers. I just wanted to make sure I am wiring it correctly.
-
The guy I got the system from says he had it bridged and sounded pretty good. I just can't get it to sound any louder than my 6x9s. So let's say I have it switched to 2 channel, have the subs bridged (amp has diagram for the speaker wires for bridged) Where do I plug the RCA's into? Channel A or B? Or something different?
-
Hmmm, and the link worked for me, try this one.
-
I have been using google all day, lol. They are SVC 4 ohm.
The amp is a Pioneer GMX-334.
The subs are Pioneer W1201's.
Thanks for the help.
-
I have a pioneer 4-channel amp. It has a 2-4 channel switchable. The subs are in a box wired individually. I have my rca's running from the sub preout of my alpine deck to the amp...where do I plug them in? Channel A or B? The speaker wires are already wired in bridge mode according to the diagram on the amp. I have tried all different combos for the RCA's and my 6x9's are louder than these subs. Any help would be appreciated.
Here is the amp I have.
http://reviews.cnet.com/car-amplifie...-30233358.html
I read that the amp is capable of 1 ohm. Now can you wire the subs into 2 ohm and bridge both channels of the amp (two individual speakers wires)?
-
So how do you explain the body panels moving?
Do we judge subwoofers on sensitivity? I thought the sensitivity rating means how efficient the subwoofer is?
-
Looked at a lot of youtube videos of Power Acoustik P3's. They are very capable of getting real loud. They are in my budget for 2 15's. Do you think I will have any problems with the car as far as the battery and alternator not keeping up?
Also do you think I have room for 2 15's in the trunk?
-
LMAO, I got you now.
-
4 of these on 600w and your set.
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=264-854
Funny thing I was looking at the Dayton's on that site, are they really that loud?
-
Umm...^^ What? LOL.
-
Look for a used fi ssd. They are awsome subs
What are you hitting with your setup?
-
I just got done looking at those, 1 of those will be louder than the L5?
-
Just like my older post(decided to spend more), will be in a 4 door sunfire.
Amp like I said will be matched to the amount of watts the sub/s will need.
Amp will be bought later, will be getting the sub/s first and building box, than buying amp.
-
Looking at 1 sub, maybe 2, or 3 cheapies. Budget $200 and under for cost of sub/s.
Enclosure will be sealed unless someone can help on a ported box design. Whole trunk will be used.
Amp will be bought later, will be matched for sub/s.
Don't really want to go high power for the simple fact that do not want to upgrade alternator and battery.
System will be in car for 3 years and then be taken out.
Was looking at 12" Kicker L5, any other suggestions. I want to be loud as possible, lol.
Thanks guys.
Help wiring 4 channel for 2 subs.
in Amplifiers
Posted
I will tune it tomorrow, also where do I get the CD listed on the JL site?
Back to the RCA's. How should they be configured.