Jump to content

guimond47

Members
  • Posts

    273
  • Joined

  • Last visited

Posts posted by guimond47

  1. Well as for my un named 253 amp alt , i think the the voltage regulator set curve is set different the the mechmans. They put out 220 amps at idle. Mine puts out 110 amp at idle and the mech mans are 1000 time better built yes but when i rev over 1300rpm i think i should get 220amp from mine atleast.... Mech mans are built for what we do. From what i heard they can set the regulator to your liking.

    My battery that i spent 300$ on is a northstar agm ultra. It has a crank pulse of 1600 amps so it says and the reserve capacity isent big due to the fact that the gm battery trays are so small....

    Does it hurt an amp bumping at idle and i get a voltage drop to 13.2-13.4~ cause at idle thats what it falls to... I never checked voltage drop at the amp itself tho...

    Thx to whom is helping me steer in the right direction. I miss my subs and i might pick up a rockford t2500 but i wanna see why im frying amps first.... If i blew the mosfets in that rockford like the orion did id be soooo pissed!

  2. For wire run front to back ive got the bigest welding cable i could find 4/0. Its like 3 0guage wires in one. Cost me 300$ for 16 feet lol. For batterys i have two under the hood. One agm with gold post(not lead) that cost me 300$ (900cca) and a regular lead acid batt (800cca). For an alternator ive got a 253 amp . I went to see my local altornator dealer and showed him what was going he said my belt was too loose. so im working on routing it differently with double the tension

    No batteries in the back ...

  3. Alright . with the gm alt's does it make sence after i start my truck on a cold day it notice my batts lost charge so the voltage goes up to 14.8 to recharge my batteries. I dont have volt drop when it does that. Its like the rectifier in my alt goes to max. Then once the batts are charge or a normal day ill get volt drop on idle. I have a 253amp alt... The rectifyer should output amps when it needs it shouldnt ?

  4. Hey guys i built a new box that goes under my seat in my ext cab and i have 1.6 cu. ft per side , im gettint the new 2012 10" alpine type r's and want to port the box . I will be using pvc piping then after flare it with a heat gun. My box dept is 14" deep x 7 " high x 18" wide . My round port is going throught the 14" lengh and loooking to be tunned at around 32 hz . Whats the lengh of my port ?

×
×
  • Create New...