headshok

Hi guys, just did a simple box for my ride. so just sharing some pics i don own a router, so well, didnt round off the necessary edges, but this is a temporary box, so oo well, hahaha. it gets the job done cheers just a simple box, cheers

just curious, where was the mic placed? in the cabin or outside the cabin? anyway, i agree with some of u guys, i tink if MTX paid meade to do a project on the jack hammer and fully sponsored him every piece of equipment, i guess pple will be saying different things about it.

hmm... nice article.. thanks man. 4kz, thats kinda high.. but will try it out. thanks again man! cheers

really? haha.. down side is, i heard they're hungry as *uck man.. my cousin used his Butler TDB 2150 (2x150) to drive them, said there were just simple magical.. heheh.. anyone can recommend wat freq i should cross this at?

Hi guys, went to salvage my cousin's old audio stuff, he's givn up audio(age caught up) and is playin more of performance (he just got BMW's new twin turbo coupe, forgot the model). aniway, so yeah, salvaged these tweets from hi, suppose to help hinm sell them, but think i'll keep them awhile and he'll prob sell them to be cheap.. heheh here they go: Dynaudio Esotars. Anyone have any idea whats the lowest freq these babies can handle? 2k? 2.5k? cheers

hey steve, nice spkrs man. just curious, how low do these guys go? what did u cross them at? just curious cos i've heard my friend's SEAS L5 (i tink), he crossed his mids at 40hz, gentle slope, after a lot of soundproofing, that 6.5" hit pretty low, do the XXXs handle it that low? i'm on the Atomic's QT6s, unfortunately, they don go that low. Just curious on the XXXs. cheers man

yoyo, i'm from Singapore man, i'm across the ocean, prob 15 hrs time difference, haha.. its like 110 am in the morning now, heheh..

make that 2.. hahaha... u ever get any "international" visitors? hahaha.. damm i wanna listen to u 4 18s!

damm thats a LONG ASS DRIVE!! set! its a date! at most i'll head up on a friday night and get a motel and meet up with u on a saturday and head back to LA on a sunday! then i can tell pple here that i've met the one and only steve meade! . man it'll be cool havin coffee with u man! make a vid with me in it!hahaha.. cant wait to be up in the US again man! cheers!

where's sac town? near LA or SF side? just to clarify Sac-Town is Sacramento ooo ok man. thanks! checkin it out now on google earth.. heheh cheers

DAMM... it thats far, well, its alrite, i'll find my way down.. hahaha... this is one car i MUST sit in and listen.. heheh..

where's sac town? near LA or SF side?

Heya steve, i'm arranging a summer exchange to UCLA this june, i would LOVE to come down and be able to meetup with u and check out ur rides and hope to learn tons from u. down here, no one has anything remotely similiar to yours and no one knows crap abt loud systems. which part of cali are u in? cheers! Russ

oo thanks for the info guys. finally got some time away from my girl, gonna touch up all the bumps on the door and re sand it down.... happy 2007 guys cheers!

yo guys, so sorry for the late reply, been out during the new yr weekend.. will get back to fixin up the the door panel.. hehe.. will prob try to stretch vinyl over it, heheh.. will update u guys again. cheers!

ooo. ok guys.. thanks for the info!! cheers!

hi guys, just curious, is there a market for japanese imported body kits in the US? i'm kinda doing this as a sideline locally( down here in singapore), i'm bringing in all sorts of accessories from Japan and am considering exporting to the US. but needa know whether 'import cars' as u guys call it are 'hot' and popular over there and whether there is a demand for kits? (ie mugen kits, TRD, etc etc). thanks guys. cheers

hahaha... if my gf finds that i ditched her to spend time sandin my door, she'll stuff the bondo up my ass or pump FG resin into my dick hole.. (ouch!).. hahahahahaha.. man its 330am here.. gonna hit the sack, nites guys..

that helped A LOT! haha.. but the only electrical plug in my carpark was like on the other side.. was pretty troublesome... heheh.. aniway, if time permits, i'll see how i can further make the panel prettier.. looks dam ghetto now.. ahahaha.. thanks guys! CHeers

hahaha.. got dammm tired... hahaha... i sanded down the rear part more, the inner part, not so obvious to people.. haha.. when i've more time, i'll try stretchin vinyl over it.. heheh.. cheers!

yeah man, but really, don have the time man... my girl friend will nag my ass up the wall.. and when sch starts, its back to books for me. will try to conceal up the flaws. come to the worse, i'll just stretch vinyl over it.. haha.. thanks for the support guys! cheers

hahaha.. isnt canada right hand drive too? so u should see some right hand drive rides on the US roads eeh.. haha.. i drove ard in LA when i was in the US in june took a bit of gettin used to, i was pretty ok on the big roads but drove on the wrong side in the small neighbourhoods.. hahaha.. , u. haha.. one thing my US friends asked me was how do u drive stick on a right hand drive. they cant seem to figure out "left leg clutch and left hand gear"... hahaha..

just take a lot of patience. correct tools will make life MUCH easier aniway, here;s more pics attempted to patch up the holes with more bondo and sanded it down.. damm.. there MUST be an art to applyin bondo properly. thank god i had my dewalt mini sander, helped A LOT! hahaha.. aniway, gave up halfway. cos there was no way i was goin to get a perfectly smooth surface with the time i had. its a friday afternoon, and its gonna be the new year weekend. my girl friend will kill me if i spent the weekend sanding down the door.and after that, its back to school, wont have any time left. just had to make do . primed it down.. still deciding wat colour i should spray the pannel. wat do u think goes well? my original panel cover was beigh. any suggestions? anyway, here the final product, mids hit pretty hard, but damm!! screwed up some places. i put too much bondo in the parts where the door closed, so my doors cant close properly. they have to be shut HARD. also, ONE big problem is that, if u look closely at the transition where my door panel leather meets the bondo. i have up thjinkin of a way to merge it and am just gonna buy something (anythign decorative) to cover up that area. any more suggestions. aniway, the mids hit hard as hell! hahahaa.. yeah... cant wait to hook up my 100 HC to them.. muahahaha aniway, wat colour u think goes well with my door? also, is it ok to wet sand even with the primer on? cheers!

heya guys. thanks for all the support. aniway, today did the glassing, and some screw ups did arise. i don live in a house, thus this is where i did my work, the car park by the dumpster(thank god it was empty). aniway, some of u guys were askin abt my ride, its a 2004 mit lancer. more pics of the panel got it sanded down it was gettin late and i got hungry. and my friend came over to help out, then he wanted to go for dinner, so i did a hurry job in the bondoing, big mistake, will have to patch up the whole panel tomorrow again. i decided to do 1 door first, so that watever cock up happens on the first one, i know wat to do on the 2nd one. the screw ups that happened were that: for one of the panels, i did not let it cure long enough b4 lettin it stand vertically, so the harden fleeced kinda could "fall off" at one side. had to screw it into the door panel. also, i'm wondering, if u can see, on the door handle, there is a transition btw the original door cover and where the fleece starts. any suggestions on how to go about "blending" the transition in? thanks guys. will try to cover as much tomorrow

thanks for the encouragement guys. more work tomorrow. cheers!