BadBoy

I put it on front 1 at frist but it will only play as a tweeter even when I swicthed it to Full range. Why Should I put it on front 2 The pxa-h701 manual says that front 1 will play full range just to switch it to full range. Thanks BadBoy

I looked in the pxa-h701 manual and did not see any thing about swicthing to passive iirc can you tell me where you seen that. And with controling it from the deck I cant find any thing to swicth it to passive. Thanks BadBoy

I tried changing the speaker setting to full range and it still only played as tweeter in fact it had no difference when switching between the 2. I turned on the optical output on the deck but did not know if the EQ needed to turn on anything but I saw no change setting on my deck when in the eq setting's mode. I think my unit is just bad I talked to the shop today and they are going to order me a new one but it will take awhile because of the holidays. But I am not sure I am going to keep it I think the EQ might be to much for my little set up But I did like the way the sub's hit with the EQ. Here is my set up Alpine IVA-w205 JL 300/4 JL 500/1 2 JL 10w3v3 subs 5 1/4 Boston pro's in the front doors 6x9 pioneer 4ways in the rear. Thanks BadBoy

Thanks for the reply From what the manual says it can be used as both Full range or just tweeters. What are you using to control the pxa-h701 are you using the seperate controller or are you using a alpine head unit. Did you have to turn on any settings for the optical or didi\you just plug it in On my setup I only turned on the optical out on the deck and cant find any thing in the EQ setting to change it to get optical in so i am assuming it is working and not still just getting sound from the Ai-net cable. Thanks BadBoy

Hello I am New to this forum and could use some help. I bought a new Alpine pxa-h701 to add to my Alpine Iva-W205 but I think it might be broken On the front 1 output it will only play as tweeters not full range. I have tryed everything i could think of but it only will come out as tweeter's. Also when I first hooked it up When I would fade it to the front the rear would play (I checked to make sure I had the right RCA's in the right place on the EQ and the amp). then later that day out of the blue when i tryed fadeing it to the front it worked and the front only played. Anyone here have this EQ how is it for you I was also told and read a lot that using the digital cable would be best and that i would tell a big difference from using the AI-net cable from the iva-w205 to the pxa-h701. And I dont know if it is me or what but when I adjust the eq settings I dont hear a differnce only when I adjust the x-over setting do I hear a differance. This thing Thanks BadBoy