Jump to content

stevog

Members
  • Posts

    780
  • Joined

  • Last visited

Posts posted by stevog

  1. you wont notice much performance gain with a intake. It will mainly just sound a bit louder. If you buy a intake from ebay they are pretty good and do what there supposed to but it would be better to buy one from ebay and then an extension tube so it can go lower and get cooler air so you would have a cold air intake for around 100 in total. After the ebay filter is old just replace it with a k&n or a AEM filter

  2. ok so i want to upgrade my speakers in the front and in the back all are 6.5 and i also want to upgrade the tweeters i was looking at the pioneer a series coax but i have heard and been reffered to using components i am going to run the speakers off the headunit for now until i buy an amp later. my budget is around 200 for all

  3. ok i was tuning my amp with the dmm and i only had to turn the gain 1/4 and bass boost at 0 and it got to 34.6 which is like 1000 some watts and when i had my kicker i had my gain at half with half bass boost im a little confused if i get the bl will it sound to low or how would it sound im a little confused with this dmm thing

  4. that hfi is only gonna put out like 800 rms if it's the new hfi line, they're pos....you don't really need any options on the bl if that's all the power it's gonna get.

    i know there overated but are you sure i thought it would put out atleast 1200 at 1 ohm

    what's the fusing on it? because i thought it was 2x 40 amp ones, but i could be wrong

    its 2x70 like the brutus one it actually looks exactly the same just with a different shell

  5. that hfi is only gonna put out like 800 rms if it's the new hfi line, they're pos....you don't really need any options on the bl if that's all the power it's gonna get.

    i know there overated but are you sure i thought it would put out atleast 1200 at 1 ohm

  6. Loudness makes the bass and highs louder at lower levels to compensate for road noise I believe. On some decks it clips, on others it doesn't. Mine doesn't.

    About the amp, set the gains correctly with an o scope or if you dont have one use a dmm. The BL will handle all the clean power that amp puts out, so just make sure you set it up right and you'll be fine.

    do you think that i would need to get the 4 inch vc or the 3 inch is good im on a budget right now so i want to try to save some money lol

  7. hi i want to buy a fi bl 12 maybe with the cooling and flat wind and i wanted to know if i could run it safely with my hifonics hfi 1500d and also the box is 2.8 cubes its all going in a 04 gto and also my headunit is a pioneer avh 3200 and it has this loudness setting should it be off or what should it be on and any help on setting the gain i think the headunit is 4v

×
×
  • Create New...