Kaotix

Yes this car is driven daily! TY for the comment..!

I'll Post Some Pics With All The LED's In A Bit!!

Got Some More Work Done Today.....

Also started my sub box. 2 12" L7's ported. Plexi front and mirror thru-out! Blue LED also. 5 cubic ft. 2 - 6" ports 19" long tuned too 36Hz.

Starting my doors! ]

I have had my nips done for bout 4 years now and yes it hurt like hell.. but i like pain. Worth the pain I would say!

Thank You all for your help! Much Appreciated Chad

If I was to just do 1 big chamber instead of seperate ones, would that make a tremendous difference?

Would it be ok to put an elbow on the port to curve it?

That Sounds like it will work for me 100%. I just want to say thank you for your help I really appreciate it. Chad P.S. I'll try to get my build pics up!

Very Confusing but trying my best As my wife laughs hysterically at me! I now have P.A. 56.52 P.A.R. 44-64 6" diam port @16" Long 37.43 Hz

Seems if I go with a 5" diameter port for each chamber @ 12" long I go to 35.47 Hz. Does that sound more logical? Ty for the help 39.25 port area Chad

Looks like I will be doing two separate chambers @ 2.6 cubic feet each. If I use an 8" port diameter and make each 1 @ 15" long, I will be at 48.75 Hz. I got this using Torres Calculator. Box dimensions are 38.5" W x 16" D Top, 38.5" W x 20" D Bottom, 16" Height. Going to be a big wedge type box. The front is going to be 3/4" Acrylic with Acrylic mirror inside. Please let me know what you think! TY, Chad

I just returned from buying the MDF and port tubes. I bought 3 different diameters 4, 6 ,8 not sure what I was going to need. Ant info would be greatly appreciated !! TY, Chad P.S. The front of the box is going to be 3/4" Acrylic with mirror inside the box

Hello SMD! I would like to fire an external dual port system up through my rear deck for my 2 Kicker L7 12's. It is in a 2001 Chrysler Sebring. My workable space will be 36" width x 15" to 17" high x 16" deep top 18" deep bottom with the subs facing rear of vehicle. Any help or suggestions would be appreciated. each sub will be powered by an Xtant 6.1 mono amplifier. I am hoping this design/dream will work! TY, Chad A.K.A Kaotix If you would like to see my old system and current ride I am listed on Cardomain unde Kao or 2001 Sebring Sedan.

TY but I want these to mach my 2.2 and other 6.1!

Looking for an Xtant 4.4 and an Xtant 6.1 . Would like the chrome tops to have minor scratches! http://www.xtant.com/archives/html/products/xtant4.4.cfm http://www.xtant.com/archives/html/products/xtant6.1.cfm TY!