-
Posts
113 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by FreeZzy
-
-
-
Yes i have a subsonic why ?
( Edit: I set my Frequency today i put AP on my speaker amp and all way down for frequency and i put frequency of subwoofer amp little bit more than 80hz, everything works good )
( is it good like that ? )
http://www.youtube.com/watch?v=3i_vSlyPYUU&list=UUhPqnVowNXYs6hHgCkLt_Ow&index=1&feature=plcp
-
Sorry it's difficult for me to understand ...
On back of my Rockford amp for speaker i have LP, AP, HP and frequency level
And on my Hifonics amp i have just frequency level
On my HU i put HPF to 100hz for my speaker and LPF to 80hz for my subwoofer
And my question is, what i need to put on amplifier if I want use frequency of my HU
-
Hi, i set my gain and I did not put the Loudness, but i have a question, if i want set my Frequencies from my headunit and not from amplifier, i need to put the frequencies on amplifier at minimum or maximum to have a Frequencies from HU ? Because when i put maximum frequency on both amp my sound is not at 100hz for speaker amp and 80hz for subwoofer amp, and when i put at low frequency they do same .. so what i need to do ?
-
Tomorrow i make a video and i'll show you how i do ok ? it's better my english is not very developed ^^
thank you all
-
I do like that you tell me if it's good:
-I put all flat on HU and turn it at maximum power
-Put all way down on my amps except the frequencies i put all way up
-Set my gain with track 3 for subwoofer amp and 4 for speaker amp ( put AllPass on my RF amp and when i set Gain i put HighPass right ? )
-Set my frequencies at 100hz for speaker, 80hz for subwoofer
-Set my EQ on Headunit, and that's it ?
When i do that i can listen music at maximum power on headunit without having problems?
On crossover of T2652-s, i need to put 0db and Axis On ? or it's better i put Axis Off ? it change anything ?
( it's a lot of questions I know, but in France people do not know all that, so I am informed here as much as possible )
-
for set my gain, i play track 4 for my speaker amp, and play track 3 for my subwoofer amp
So i can set my Eq but it's better i don't use Loudness right ? ( my HU is Pioneer 7200SD )
-
I have a Hifonics BRZ 2100.1D for my DC XL 15, and Rockford Fosgate Power 600.4 for my 2 T2652-S
i put track for sound quality ( i don't remember wich track is ) and i put loudness because the sound seems clearer
I do like you said for the amps.
So my set with DD-1 is good but for the loudness i need to turn it off ?
-
Hi, I tried several times to set my Amps with DD-1
And i'm not sure i do it properly, can anyone help me ?
I do like that:
1: all to flat on headunit and amplifiers
2: Put RCA of my headunit to DD-1
3: Play tracks 40 hz and 100hz to see max power of headunit
4: When i see max volume without distortion ( 62 on my headunit is max and i don't have distortion ) i put max volume and set my gain on amplifier with 40hz and 100hz track ( frequencies all way up )
5: And when i do that, the manual say " Later, when you set the amplifier gain(s); you can reset these to where you feel the customer will set them, or where you will set them for your own system. "
And my problem is here, when i set as like want ( loudness ON, Eq like i want, Frequencies for speaker at 100hz and 80hz for subwoofer... ) i see distortion on amps, so i don't understand.
Can someone tell me how to do step by step?
thanks
-
Nobody wants to help me thanks
-
WTF my Rear left tweeter is blown i don't know why, i have Pioneer 7200SD headunit, and i put the volume at 54-55 is it to much ?
I put the Freq at ~80hz and Highpass ... anyone know what happened?
-
That seems to be fine like that? But i don't know how to set the Punch EQ
Need help thanks
-
-
Hi, And i have one more question.
I have a Punch EQ on my amp and i don't know how to set ?
thank you
-
Can I put a remote wire between my 2 amp? or I need to put a second remote from headunit ?
thanks
-
-
Ok sorry, I did not understand the first time
Can i use a 300A fuse ?
-
i have a battery in the back, a XS D2400, and I just wanna know if I can continue with this installation until my next car
-
Yes i do a big 3 but i have a stock battery and stock alternator ( D2400 in the trunk ), and my voltmeter drop sometimes at 12.4v when i listen music.
But i change my car in few months for a Passat CC v6 so i just want to know if my installation works good for this few months ?
( again sorry for bad english )
-
i see the installation on Rockford Fosgate website, sorry for not looking before to ask my questions here ...
but I still need an answer to my other question
" I have one more question, i have a XS power D2400 ( with Hifonics BRZ2100.1D for my DC 4XL 15 ) and I want to know which fuse I need to buy for the connection between the amplifier and the battery and if the battery will be sufficient for this two amp? "
-
I have 4 crossover ( 8 input ) and 4 output on the amp, i can't run wire in tweeter and woofer input on 4 crossover ...
I think Kranny give me a good solution..?
-
So i just need to put a wire from the amp to the Tweeter input ?
-
Now i'm uderstand, thank you
I have one more question, i have a XS power D2400 ( with Hifonics BRZ2100.1D for my DC 4XL 15 ) and I want to know which fuse I need to buy for the connection between the amplifier and the battery and if the battery will be sufficient for this two amp?
-
Sorry but i don't understand, can you make a diagram please ?
thanks
Need help to set properly
in SMD Distortion Detector (DD-1) Topics
Posted
nobody can answer?