-
Posts
518 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by viper1315
-
-
That's not nearly enough port area I'm afraid. You would need much more than that. Like 12-15 sq inches per cubic foot. Also, that design will rock back and forth. The transmission hump in that truck is slightly tilted forward. The box will try to lean forward as well as a result of this. You've got depth you're wasting by not going UNDER the rear window trim panel, a good two inches I'd say. I've built my box 14 inches of height to sneak it under the window line. Length is 56" and top depth is 7" bottom depth 10". You'll lose some volume, but you COULD fiberglass down past the hump and put the box to the floor and gain quite a bit of airspace I would guarantee.
So you are saying to go a little lower and make the box go down farther by going below the transmission hump on the floor of my truck and what should i do with the port if i do that. and the box will be bolted down.
-
Will this work for a while?
-
Well since I won't have my 8 10s for a while do you guys think I should just put a ported box behind my seats? I have some room just will not be comfortable for a while but let me know. I have a diagram I can post on here soon
-
I still use my middle seat though when I need to take people and I don't want to behind the seats
-
Here is the truck and i am doing a blowthrough because i cant fit them behind the seats.
-
I have a question for my two Level 4 10s in my truck doing a blowthrough. I am wondering what type of box i should use a 4th order? and i am just wondering if anyone has a good design for this and tips. I want to make it as loud as i can until i get my 4 other 10s.
i will get the detentions to you guys soon but i have the whole bed to work with.
-
pretty small starting battery. is that the biggest size that fits?
i am now looking at the 2500 or D3000
-
Will this battery be decent enough to replace my stock battery for now under the hood until i get another one on a 2000RMS system.
Blowthrough Box Questions
in Subwoofers / Enclosures
Posted
Yes I understand what you are asking I am planing on going down farther and where the console comes up and down make an indent into so it fits perfect. And I am planing on bolting the box to the back wall of the truck like I have done previously possibly the floor too. I am
Just wondering what to do with my port now though if I should change it