michael_woodworth2000
-
Posts
46 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by michael_woodworth2000
-
-
I was gonna run 2 of them on a amp and the 3rd on another amp that's why I wanted 2 chambers.
-
I was gonna run 2 of them on a amp and the 3rd on another amp that's why I wanted 2 chambers.
-
If u don't mind, could u design me a box for 2 15s in 1 chamber then 1 15 in a separate chamber so it looks like one box. The 2 15 will be massive audio and the single 15 will be a Dd 3515
-
Yes there is. Its a 99 explorer sport.
-
I can get 42 wide and no restriction on depth and height because its going in an explorer with back seats removed and a false floor to extend the trunk/hatch are all the wat to the front.
-
I also have a pair of Massive Audio DC 10's that get crazy low as well, around 24hz in a 4.5 cube box with 3 4 inch tubes tuned to 33hz with 7inches per foot of port area.
-
I had a pair of AQ 15's that got nasty low i could play down to around 14hz and could do a minor hair trick at 18hz on 1500 watts. My bandwidth was outstanding as well. I could play as low as 14hz and into the 40's+ no problem. It's all in the box. I ran the AQ's in a 8 cube box tuned to 35hz with port area of 12 inches per foot.
-
I got a pair of Massive Audio DC 10's and i was wondering if anyone could help me with a box design. I want a box good for SPL as well as a decent daily box. Preferably Tuned in the lower to mid 30's or higher if i can still play into the 20's. I mainly listen to decaf and big pimpin. Thanx.
-
Yea i'm hoping i can get atleast a 142 with them. I'm gonna have to design an amazing box for them.
-
I got a 129.1at 33hz in the trunk of an LHS with these with only 1 coil on each working on 240 watts so i think they should slam in my expolerer on 1500 watts fully functioning.
-
I traded 2 kicker cvr 12 for them because they are $310 new each and they each have one blown coil. I'm planning on spending around $160-$200 to recone them. They are beast subs.
-
I emailed PSI yesterday just waiting on a response. BTW do you guys think these subs are worth putting recones in?
-
Does anyone know how i can get a hold of a pair of dual 1 ohm or dual 4 ohm massive audio dc 10 recones? I don't care if they are psi or massive recones as long as they fit. Thanx.
-
I have a 99 exploere sport and i'm running 2 ap1500's on a fully loaded fi bl 18 dual 2 ohm sub. What does everyone estimate i will score on the TL?
-
Tell me how it goes, bassrace.
I'm gonna ground my hu to a bar in the dash first to see if tht fixes the feedback.
Then if its a no go, ill go straight to a batt.
Lmk wats up
Is yours doing the same exact thing mine is? I've never heard of alternator whine just comming out of no where, it's someweird stuff.lol
I was thinking the same I will just run a ground to the batt and see if that's a fix. If not I will ground the rca's. It's raining here soo no glassing today, I guess I'll just do the fun stuff, troubleshooting.lol
I just hooked up an amp on my mids and highs and i'm getting the same thing. Does yours get louder as your rpm's get higher?
-
Turn your subsonic filter down to the minimum and set your low pass crossover to around 50hz and that should do it.
Leave subsonic 2hz below box tuning, if ported. Turning the subsonic all the way down is a good way to bottom out a sub.
I have an ap15001d on 2 aq sdc2.5 15's and i have my subsonic on 0 and low pass on 60hz and it's loud and clear and never have bottomed out and i've played a wide spectrum of frequencies. I'm at 1ohm and tuned with a DD-1.
-
6-8 total net cubes. I currently have 2 aq sdc2.5 15's in an 8 net cube box tuned to 29hz on an ap15001d tuned with a DD-1. Shit slams. Better to keep it on the large side than smaller with AQ's.
-
Turn your subsonic filter down to the minimum and set your low pass crossover to around 50hz and that should do it.
Box design...
in Subwoofers / Enclosures
Posted
I can't afford 2 dd's. Im getting the 3500 motor for $100 and a recone for around $200.