Jump to content

michael_woodworth2000

Members
 View Profile  See their activity

  • Posts

    46

  • Joined

  • Last visited

 Content Type 

Everything posted by michael_woodworth2000

  1. michael_woodworth2000
  2. michael_woodworth2000
    I can't afford 2 dd's. Im getting the 3500 motor for $100 and a recone for around $200.
  3. michael_woodworth2000
    I was gonna run 2 of them on a amp and the 3rd on another amp that's why I wanted 2 chambers.
  4. michael_woodworth2000
    I was gonna run 2 of them on a amp and the 3rd on another amp that's why I wanted 2 chambers.
  5. michael_woodworth2000
    If u don't mind, could u design me a box for 2 15s in 1 chamber then 1 15 in a separate chamber so it looks like one box. The 2 15 will be massive audio and the single 15 will be a Dd 3515
  6. michael_woodworth2000
    Yes there is. Its a 99 explorer sport.
  7. michael_woodworth2000
    I can get 42 wide and no restriction on depth and height because its going in an explorer with back seats removed and a false floor to extend the trunk/hatch are all the wat to the front.
  8. michael_woodworth2000
    I also have a pair of Massive Audio DC 10's that get crazy low as well, around 24hz in a 4.5 cube box with 3 4 inch tubes tuned to 33hz with 7inches per foot of port area.
  9. michael_woodworth2000
    I had a pair of AQ 15's that got nasty low i could play down to around 14hz and could do a minor hair trick at 18hz on 1500 watts. My bandwidth was outstanding as well. I could play as low as 14hz and into the 40's+ no problem. It's all in the box. I ran the AQ's in a 8 cube box tuned to 35hz with port area of 12 inches per foot.
  10. michael_woodworth2000

    Can't wait to recone the massives. :*)

  11. michael_woodworth2000
    I got a pair of Massive Audio DC 10's and i was wondering if anyone could help me with a box design. I want a box good for SPL as well as a decent daily box. Preferably Tuned in the lower to mid 30's or higher if i can still play into the 20's. I mainly listen to decaf and big pimpin. Thanx.
  12. michael_woodworth2000
    Yea i'm hoping i can get atleast a 142 with them. I'm gonna have to design an amazing box for them.
  13. michael_woodworth2000
    I got a 129.1at 33hz in the trunk of an LHS with these with only 1 coil on each working on 240 watts so i think they should slam in my expolerer on 1500 watts fully functioning.
  14. michael_woodworth2000
    I traded 2 kicker cvr 12 for them because they are $310 new each and they each have one blown coil. I'm planning on spending around $160-$200 to recone them. They are beast subs.
  15. michael_woodworth2000
    I emailed PSI yesterday just waiting on a response. BTW do you guys think these subs are worth putting recones in?
  16. michael_woodworth2000
    Does anyone know how i can get a hold of a pair of dual 1 ohm or dual 4 ohm massive audio dc 10 recones? I don't care if they are psi or massive recones as long as they fit. Thanx.
  17. michael_woodworth2000
    I have a 99 exploere sport and i'm running 2 ap1500's on a fully loaded fi bl 18 dual 2 ohm sub. What does everyone estimate i will score on the TL?
  18. michael_woodworth2000
    Is yours doing the same exact thing mine is? I've never heard of alternator whine just comming out of no where, it's someweird stuff.lol I was thinking the same I will just run a ground to the batt and see if that's a fix. If not I will ground the rca's. It's raining here soo no glassing today, I guess I'll just do the fun stuff, troubleshooting.lol I just hooked up an amp on my mids and highs and i'm getting the same thing. Does yours get louder as your rpm's get higher?
  19. michael_woodworth2000
    Leave subsonic 2hz below box tuning, if ported. Turning the subsonic all the way down is a good way to bottom out a sub. I have an ap15001d on 2 aq sdc2.5 15's and i have my subsonic on 0 and low pass on 60hz and it's loud and clear and never have bottomed out and i've played a wide spectrum of frequencies. I'm at 1ohm and tuned with a DD-1.
  20. michael_woodworth2000
    6-8 total net cubes. I currently have 2 aq sdc2.5 15's in an 8 net cube box tuned to 29hz on an ap15001d tuned with a DD-1. Shit slams. Better to keep it on the large side than smaller with AQ's.
  21. michael_woodworth2000
    Turn your subsonic filter down to the minimum and set your low pass crossover to around 50hz and that should do it.
  22. michael_woodworth2000

    I see 18's in my near future... :)

  23. michael_woodworth2000

    I see 18's in my near future... :)

  24. michael_woodworth2000
  25. michael_woodworth2000

    I just semi-finished my first build and got a 129.1 on the termlab 33hz pead frequency with 240 watts rms in a 5 cube ported box tuned to 32hz with 2 Massive Audio dc 10s

×
×
  • Create New...