whats the difference between the neo pro 8"s and like the Sa-8 ? no info on site about neos so thought to ask. What would be better for midbass like in doors and why > thanks in advance
on itunes ? just did nothing..
yes on itunes. try typing in a song by them and try and find chp. thats what i did. i typed in the saw by chp and it came up
yes i have saw but thats it
so turn the switch to HP filter, dial in the knob to around 70hz , and should i turn the LP filter know all the way up or down, or does it get de activated when the switch is turned to hp filter ?
I bought a pair of 6x9 alpine type S's. I will be running the off a 4 channel amp but only use channel 3 & 4 (1 & 2 for front) . What do i look for on the specs of the speaker to know what to set the lp filter to and the hp filter too. Also do i set it to full lp or hp ? thanks
There's probably a switch on your amp for full range, low pass, high pass....set it to full range then set your gain, done.
ok thankyou. I just want to do an easy setup first. later on i will expand.
****ALRIGHT. I will be having rcas from headunit to the amp. then the amp speaker outputs to the xover. Auras. then that will have wires to the driver and tweeter. off a 4 channel amp(only using the fron 2 channels for the left and right. Channel 3 & 4 are for rear. this is passive as i am told.. If anyone wants to help me or correct me or advice PM me. No use blowing this thread up.
So if i buy those xovers and have the amp wires go to this then too the tweeter and mid that is active?
and can i just use a 3 channel amp , one for each side ? and what do my settings on the amp havre to be ? i would assume nothing except gain because the xover is filtering all of it , right?